Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Did you check your differential fluids after fording.
Perform a grease service on everything?
The original rubber hoses on the diff vents will be old and cracked unless you replaced them with new ones.
Water has a nasty habit of finding its way into everything.
Install support bracket ASAP!
One good pothole and your starter will be hanging down from the wires.
Busted block and/or snapped starter bolts will result.
Also do not reuse the starter bolts.
They are one time use only.
ACDelco still makes them and their not expensive at all.
Install the...
The drain plug you installed is in a different location than from a factory pan with a drain.
Any clearance issues?
A plug closer to the front is less likely to be caught on something.
So the theory goes anyway.
Odyssey 6T battery’s are the civilian Hawkers.
Best battery on the market.
Expensive yes, but you get what you pay for.
With the the exception of my CUCVs (Hawkers in those), I run red top optima battery’s in every Vehicle and tractor I own.
Can’t afford that many Odyssey battery’s.
I...
It was a Bell 407
Hydraulic pump was the culprit.
Destroyed itself and spread metal shavings through most of system.
Just one of many emergency’s we train for.
It’s like driving a car without power steering.
Doable but no fun.
The great thing about the Sweetwater airport is it’s an old...
That a great museum!
I went through it several years back while waiting for maintenance personnel.
Had a main hydraulics failure on a Helo while landing for fuel about 10 years ago.
You prove my point of someone not willing to invest the time to actually read the TMs and want someone else who has read them, and taken the time to learn how to use them, to give you the info.
The CUCV TMs are far from massive.
5 ton TMs get interesting
The TMs for the MH-47E Helicopter are...
Everyone wants to help.
But doing one’s due diligence in researching the issue before posting should be automatic. (Not including emergency’s).
Some people are simply not willing to invest the time and will post a question without ever searching or reading anything.
Otherwise this forum would...
Welcome to Steel Soldiers
Have you downloaded the Technical Manual?
Did you search the forums for the same issue?
Issue has most likely been covered before.
Factory Pan off a HMMWV.
It was already installed when I bought the truck.
Shouldn't be too hard to find one.
That is the factory finish.
No spray paint
Picture was right after I serviced transmission
So how much did the shock, 1844-2, from Mendenhall Industries cost?
Their website doesn’t say.
Croft Trailer has the lowest price available that I’m aware of.
Generators are machines and things happen.
The key here is you troubleshooted, identified the problem and corrected the issue.
SS is an excellent resource and you utilized said resource.
As a result, you had power when it was needed most.
You would be amazed on how many people simply cannot...