Search results

That is part of the fording system

gage lights work off the light switch, the lower left lever all the way up gives bright dash lights, one click down from bright gives dim, must have headlights on, top lever all to the right

According to Crismon, the motor was a LD-465-2, this was in both the XM401 and the XM401E1, along with a 3 speed auto. The truck is a Chrysler build, so the first could be a Chrysler gasser, since the pilot was built in 1958 and since the 58 deuces had a gasser, this XM401 could be the PILOT...

DO not know the M number, but in vietnam we used a lot of our water trailers to haul fuel, some we mounted a gas powered 1 lunger pump, others we just used jerry cans to move the fuel

page 391 in U.S. Military Wheeled Vehicles, by Fred Crismon, has a write up on this truck, in it it says it has multi in it, in the #3 pic, it shows what looks like a carb and governor. ???

From looking at the broom pics, it needs to be REBRUSHED, that can turn into a CHORE

BEAT me to it, sounds like a needed read from the sound of the start of this thread You can find the TMs here UPDATED LIST -=-=-=-=-=-=-=-=-=-=-=-=- JATONKAM35s HOME ON THE WEB OR Free Military Army Manuals! OR Former Military Vehicle Owners - Index OR ARMY 6X6: SERVICE MANUALS OR...

WRONG, not a 39 year old noise, there is a cause, find the cause, fix the cause, the noise goes away, I have had BIG trucks as old as 1931, thay make all kinds of noise, but you can get rid of the noise with a bit of work, the noise is no different then modern noise, comes from the same things...

On top of what FERRO said, I would not brag about this, the WRONG person reads this (yes the site IS WATCHED) and we could get ALL our trucks stopped, some states don't require plates, stuff like this HURTS everybody

This CAN NOT be for REAL, but if by chance it is, then I really, really think you need to read the TMs, starting with the -10 You can find the TMs here UPDATED LIST -=-=-=-=-=-=-=-=-=-=-=-=- JATONKAM35s HOME ON THE WEB OR Free Military Army Manuals! OR Former Military Vehicle Owners - Index OR...

loose steering box ???

Check the rear trunnion, had this noise BAD on Jim Hendersons deuce, we thought something was broke in the left rear, axle or something, could not find anything, checked everything on the right just for grins, found the that the right trunnion bearings were loose, adjusted according to the TM...

Just remember that the total GL, tax, sf97, GL blood money PLUS trucking PLUS the cost of getting it on the road is the TOTAL cost of the truck, so put that against a PRIVATE sale that pretty much is drive it home and REG., there are some REAL NICE deuces for around $3500 in the classifieds, in...

Don't see the big deal about RIFLE MOUNTS, when I was in vietnam, if the truck had a mount (only a few)it was never used, if the weapon was needed, the mount was another UNNEEDED delay, Also a side note, my BIG not being thrilled by GUN RING mounts is that the loaded gun ring trucks where the...

Just a REMINDER

not really, I have had rims RUSTED to the drum, all the bud nuts off, took a BFH on the edges of the rim many times to get them to break free

816 = 35050 lbs per the -10

If everything works, has a lot of the BII, 45 is a good price, getting the goodies is what cost a ton,

those adaptors will work on the axle clamps BUT will NOT work on the bumper lift brackets