Search results

:ditto: I does look good.

Look like nice data plates!

(bolts that hold the wheel together) From what I have seen, is the ten bolt wheels on the M923A1 take the 5mm o-ring and the twenty bolt wheels take the 8mm o-ring. Also the ten bolt wheels on the M923A1 take the same o-ring as the M35A3 (5mm). Erik has them Rim O-Ring For Two Piece Rims on...

I use the John Deere 50/50 (Cool-Gard). Has worked well for me.

Looks like a nice ride!!!!:driver:

Carnac, Any info would be much appreciated!! Thanks!:beer: M332 Ammo Trailer a. Serial Number 64916 b. Registration Number ??? c. NSN 2330002001785 d. Where I bought it, GL Ft Bliss, TX Right side (Passenger side) C9T Left side 49^3/133FA

:ditto: That is what I did. I put the cutoff behind the passenger seat so I can fold down the seat and reach the cutoff.

I feel your pain, this is what GL did to my truck just moving it on there yard before I picked it up.

Nice looking truck!!!! :driver:

I have towed my 1000gal water trailer. It is about 10k. The Curt 15530 is rated at 18k lbs.

If you run into problems close to Phoenix. I am just north of I10 at mile maker #98 close to Tonopah, AZ. I towed a Deuce with a Deuce and got about 7mph with 50/50 wmo/diesel. But it is slow going up hills...........:driver: Good luck!!

I used the Curt 15530. The 15605 is a 2 1/2" receiver tube. The 15530 that I have is a 2".

Two group 31's or 27's will work fine.

The front brakes do not have spring brakes on them. I would try to get air from the Semi truck or get an air compressor to air the truck up or Cage the brakes. Good luck and be safe with the brakes gaged!!

Thanks for the info.[thumbzup] I guess the trans shaft is what I was trying to grease.

I went to grease my Throw out bearing and as it turns out the grease fitting is facing up.:-( Is there a way to rotate the bearing so the fitting is facing down with out pulling the trans? Thanks!!

My dad used a high-lift jack to dismount tires.

Nice looking truck!!!

Nice job and thanks for the info. and pics!!!:beer:[thumbzup]

Gimpyrobb, WOW I read all the post I could find and I also looked at that attachment and I missed that. THANKS!! I guess the fuel is turned up on the IP pump. :beer: