Search results

At the front of the bed like pictured there are usually long bolts with some springs on them. That bed looks to be swapped onto the truck of course so that would explain those bolts. Those locknuts on the frame remind me of the earlier contract deuces, and maybe a tapered engine side panel I...

Looks good, wish I could find one around here.

The box itself is the same, there are metal and plastic versions. The mouting brackets/ step assembly is different. Same deal with the m54 as well.

IN

After 5 years with the old school plow setup on the m1028 it’s time for a little bit of an update. 4 leaf springs were swapped in Minute mount push plates No more headgear year round “New” plow on it, an 8’6” Fisher ez-v. Still need to get the lights working and paint it yellow.

Can anyone who has a minute mount plow on their CUCV get some info for me? I have a set of push plates but I’m missing the angle braces between them (number 3 in the diagram). If someone wouldn’t mind getting me the specs on them I’d really appreciate it. Trying to get them exact as far as...

The plug is just used when fording the truck so you’re all set. On most trucks there’s a holder with it right next to the hole. Your problem is unrelated and could very well be weak batteries.

Good eye. But why does that matter?

More progress on the m416. Added the metal brake lines and LED lights and wiring. Still need to install a new rubber brake hose and bleed out the brakes. I’ll have to check the bearings too. I kinda like how the m101a3 jack turned out.

Welcome to the site.

Looks like a nice starting point.

He’s still around and he still has the EOD m37, just never on the site anymore.

Here’s what the military steering wheel puller looks like. Something like this and some heat will probably do it.

Welcome to the site.

Made some progress on the goofy looking m416. Nothing special up close but it’s green. I just want to get something done completely, even if it’s the easiest project.

I think I used 2” square tube. Everything worked fine.

I used the stock crossmember with an added spacer in my nv4500 truck.

Looks like a nice truck!

Welcome to the site, that looks like a real nice trailer. At least someone figured it out after only snapping two of the wheel studs.

The trailer is shown just after the 2 minute mark in this company history video.