Search results

The soapy water lets the duck bill slip in between the ring and bead of the tire to separate them and push the tire down so the rim can be removed , Wire brush and file any rough marks left by the buck bill and wire brush locking parts. When taking the rim off the tire stand it up were the...

Thank you The Mack 673 I put in my M52a2 runs about 40 mph with 11.00 20 tires . I have been real happy with it .

In some oilfield trucks grinding a ring around the axel to make a weak spot extra axles where carried and easy to change .

I have used this set up in oil field trucks in the past . they have a video search (sonnex power train saver )

Is there a hole in the bed for a drop in king pin to pull a trailer ?

Look on E bay and enter the part # 7529309

This is one of the yokes I found wen looking for parts yesterday and it is like what I used on my M211 and 67 M52a2 . In your picture of the drive line the u joint looks very large .

I just checked my jack stands to see what I really have I ordered them from Northern years ago I have had no problems the pawl handle worried me to think if pushed up it could unlock and drop the load so I tried it one day and there is a small roll pin that give way but a light load would move...

It's on the top when looking down on the steering box and has a vent in it . tried to get a picture the oil filter I have is mounted to the top of my steering box

You can go to the technical manual page for 5 ton click on the m39 lubrication

With the transmission in gear you can turn the out put to get the in put shaft to line up with the disk .

what is your top speed at 2100 RPM ?

Owners of older Mercury cars getup set when some one calls it a Ford.

My first 24volt vehicle the owner mounted a few small marker lights on the bed and hooked them up to one battery to get 12 volts and it would kill one battery . every thing needs to be 24 volt .

In

Ken tool 30609 1 1/2 cap nut wrench or called a porkchop . When running dual wheels and the in side nut comes of with the out side nut .

Transmission $ 275 plus shipping

CCKW 5 speed shifts and drips oil from pto cover . I'm parting out

Yes that correct Reverse is cable on 5 forward speeds is cable off when I set it up I was thinking of the sprag gear turning the wrong way. I wanted to use it for pulling a vehicle up on a trailer . Sometimes when loading some thing after hooking up I pull forward to get the cable straight...

I don't know if this helps