Search results

My home has a smart meter on it. But my EMC i have doesn't have real time power monitoring set up.There's a 1 to 2 day lag before it posts to my account page on the power usage for that day. But i does give me what the average draw on the house is, and is useful on determining what kind of...

I got my 803A from Albany about 2.5 years ago. Paid just over $700 for it. But since then, the prices have been steadily going up. I got lucky with mine. After i replace all the filters, oil, batteries, and put fresh diesel in it, it fired right up. Has about 3600 hrs on it. It does have a...

Since you said the 803A turns over fine with the dead crank switch, your problem should be between the Dead Crank Switch and the E Stop. Pin 3 of the D.C. switch connects to Pin 1 of the E Stop switch. Check the E.Stop pins while the button is pulled out for 24v DC +/-. IF you have voltage...

LOL. You won't be the only one for too long to be using 3 phase power to run tools. Just got me a powder coating oven off of GL in Warner Robins last time home. Gotta use the 803A to test the elements. Unfortunately...the only data plate attached to it says the heating capacity of the oven is...

Actually, it would be nice to have a spare one. But, I'm going to be trying to build a custom panel for mine...Something that is a bit different than what i've seen anywhere. That's why i need the Dimensions/locations of the holes.

From the initial pics, looks like you got a MEP-802A genset. See if the Genhead has this data plate on it. Also too, looks like you also might possibly have a Tier 2 reset genset. In a T2 reset,if the engine is bad or has been gone through, the people/shop that has done it will usually paint...

Does anybody know or have the exact dimensions for the MEP-803A Control Panel? I need the dimensions for a project I'm working on for mine. Specifically the WxL, thickness,and hole locations in the panel. I've looked for them everywhere,but still cant find what I'm looking for. If anyone can get...

As far as kilowatts, it's a 10kw rated genset. It can be loaded to 133% of rated load...but only for a few mins before the overload protection kicks in. For the physical size and weight, it's a fairly good sized genset for a rv...well, depending on what type of rv you're looking to put this...

Long time lurker/researcher of this site. But i finally have something to post for a change. Last time home I finally won my MEP-803a off of GL website. Luckly enough it was at the Albany,GA MCLB...and i only live 1.5 hr from it. Its a 1998 model that was put in storage back in 2009 according to...