Search results

if you are running 9.00x20's on a M109a3 you hight should be right at 11'. check and see what the max height is in your state. if you mount them below the box you should have 200+ degrees of visability. just run in the front of the convoy :idea:. you could put them on teloscopic poles that...

that what i call thinking outside the box, or inside the box. looks great :beer:.

if you only have a couple of dangling connections by the drivers side fender and no three-pin Bendix plug on the end you will need to get one of those too and splice it in. however mine was cut like that and i ended up having to replace the whole wiring harness. not just because those wires were...

Welcome from South East Texas. if you are saving Green Iron from the scrap yard you are welcome here. :beer: there is alot of great people and great intel here. good luck on the truck.

the left side service works the trailer brakes and air only comes out when the brakes are pressed. the right side emergency is used to air up tires or run air tools and air comes out soon as you open it (if you have air pressure. if neither has air the dirt dobbers have moved in.

some people have trouble with the push button switchs shorting out and catching fire. i have had mine for 2 to 3o years and never had any problem. but all it takes is one fire to ruin your day. i don't know how many people this has happened to. i don't know if their wiring harness was old or...

then you could be in with the Black Sheep. http://www.steelsoldiers.com/deuce-modification-hot-rodding/77526-my-new-deuce-painted-flat-black.html

OK, take a deep breath and blow on this! :shock: the breathalizer you PERVS. rofl

your bill of sale is on the GL site and you can order a SF97 for like $60.00. that gives you permission to get a title. more money but you are covered. in Texas you have to register a trailer for license plates, but you don't need a title for that small of a trailer. you do for the M105's...

to PM the gauges pull the dash panel and clean either the white plastic back or the little clear windows in the sides of the gauges. this is where the light gets in. if you can't clean it, replace it.

i put in ones that were not painted or metal covered. this will show you the locations though. the green ones are the gauge lights.

thats why i include a picture with the paperwork for the insurance. then after the recovery i drive it there and let the agent see it. when i add big ticket items i go by and add them to the policy also.

pm sent

hey, i resemble that remark. :jumpin:

i go cross eyed everytime i sit down and start reading the manual. :drool:

San Antonio GL was known (and may still be) for lifting trucks with a fork lift and bending the drive shafts and other things under them that were not made as lift points. something to watch out for.

sorry t hear about the truck, hope everyone is alright. the M1031 chevy bed goes straight forward from the rear tires to the cab and the dodge bed drops down about a foot between the rear wheels and the cab. i have a dadge bed and i have a PTO Genset to try to install. project for next spring.

if you have this type of turn signal switch. take the part the long arrow is pointing to slide it out and lift the handle past the right turn spot and you should have hazzard lights. [thumbzup] if you have the other kind there is also a small switch (i think behind the handle) then same the...

if you are not putting in a winch all you may need is the bottom frame extension that fit into the frame rails and not the top part. you would have to add support for the bumper in your design however. i will try to get a picture tonight of the underside of the frame rails with an extension.

thanks. i have owned it for 3 years and still have not made it to the box. it keeps me out of trouble (sort of) :lol:.