• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. edpdx

    I need a jack

    What is the correct jack for the m1009 and where can I find one. Mine came without anything. I have a hi-lift; but I figure since I have stock height, the original type might come in handy.
  2. edpdx

    has anyone installed working radios?

    The military type, I mean. I was thinking about installing a CB. Then I got the notion that a working radio with the ability to call and receive might look cool and make use of the antenna I have. Is it legal to install a working two-way?
  3. edpdx

    vehicle security

    After reading about recent cucv thefts- one across town from me :roll:, I was thinking I'd better switch out the ignition lock cylinder. Is there any other good security I should consider? If I have to do the doors and endgate I can do that later, I just don't wanna come back to my truck and...
  4. edpdx

    new shocks; what next?

    Got the Bilsteins for the M1009. The ride is nicer. The shocks I pulled were lifeless and did not even expand after compressing by hand :???:. The ride seems a little jouncy from side-to-side. I was thinking about what the next move, if any, should be. I don't really think I want to lift it...
  5. edpdx

    When do you change Glow plugs?

    Been driving my M1009 since late summer. Starts right up gets good mileage. Been adding some of the additives mentioned here to see what works best for me. I hate to get stuck with GPs going bad on the road, so I figured I would see about changing them with new AC Delcos. I hear that GPs do...
  6. edpdx

    Is there supposed to be another piece to the air cleaner?

    Mine. and others I have seen, seem to be missing the snorkel from the air cleaner. You can simply see into the air cleaner housing at the filter. Was a troublesome snorkel phased out?
  7. edpdx

    M1009 com set

    My m1009 came with just the dash mounting plate. It looks empty there and I was wondering if there is any good reason to have a comm set installed> What all is needed and how do you use them typically?
  8. edpdx

    Bad choice Heater Core

    Was passing the Napa in my area and stopped in to get a heater core. I asked to look at it first ($27). The box say made in china. And the part looks like they made it from stolen Airstream trailers. The aluminum is weak looking and the soldered joints look as if they rodded out a used one and...
  9. edpdx

    half the price glow plugs.

    I have been reading the threads here on what is generally used for the 6.2. Many are quite happy with AC 60G. Others with the Wellman 070. Some say they experience swelling or early retirement with both. I am leaning toward the AC 60G, then I see BERU GV 004 thrown in and after a look online I...
  10. edpdx

    Do I need to winterize?

    My m1009 starts ok so far in the cold. We have only had one or two days dip below freezing so far. Is there any reason I should get a canvas grill cover? What hols them on?
  11. edpdx

    How do you keep your rear window on your Blazer clear?

    I don't mean when loading stuff in it... I mean in this weather- my first winter, I am having all kinds of condensation and fog. I am in the middle of a search for a high quality heater core, so I don't know if having the heater and windshield degogger on will keep the rear windows clear? Will...
  12. edpdx

    GEN 2 light solved.

    I have noticed, since it has been getting colder especially, that the GEN 2 light lingers until I rev it a little. Then it stays off. Yesterday it went off; but kept coming back momentarily. All afternoon I watched and it would blink while not under load or deceleration. This morning I was...
  13. edpdx

    Heater core was taken offline?

    The cold weather prompted me to turn the heat on in my M1009. It just blew cold on all settings. I've seen this before... HEATER CORE CHANGE Aaagggghhhh!:shock: Its too **** cold to work on it but I was hoping to flush the core until I could give it more attention in the spring. WTF?!? The...
  14. edpdx

    M1009 clevis

    I have some clevis rings that came on my truck; but the hace offest eyes that are not inline with the "ring". Since I am fabbing up a swing out tire carrier, I need the original type clevis rings. The ones I have can't rotate freely. anyone have a set to sell (2)? Maybe you can point me in the...
  15. edpdx

    Tire chains- any recommendation

    I don't think I have a chain big enough (in my collection) to fit the 31x10.5/15 tires on my M1009. Anyone use chains enough to recommend which brand or type?
  16. edpdx

    Winter Tires

    What are you guys running in winter for snow and Ice... assuming you change at all? I have used the Hankook and the bridgestone Blizzaks; but not on a Blazer. The Silent Armour tires I have on have pretty decent tread still. Any reason to get a snow/ice tire for my first m1009 winter? What are...
  17. edpdx

    What tire pressure works for you?

    Have looked all over for the correct answer. There are many variations because the variables are many: What tire brand are you running? What tire size are you running? Are you running with a lift? Are you running with a load? OK lets get a benchmark for what seems to be the most common: Stock...
  18. edpdx

    Black out lights quite dim.

    The drivers side rear Blackout light in the bumper of the M1009 I bought seems to grow dim sometimes- You can see the difference from the passenger side lamp. How do you test and R&R these?
  19. edpdx

    Green OR black rims?

    Still painting my M1009. I was wondering which color is correct as opposed to wich color looks best. The rims on my M1008 were Ultra Flat Black. They looked pretty good; but I'd like to know what y'all prefer.
  20. edpdx

    NEW type of CARC

    In the middle of painting my M1009 with fresh "383" from Gillespie. I have read that it looks and finishes: "a little lighter than CARC" or"a little shinier than CARC. When I compared the dried "383" to CARC, I do see that the CARC IS both lighter and smoother/shinier. Sooooo... if this is the...
Top