Search results

Well....... At least the problem is circled! {Emblem in center}:-?

The tranny pto on a five ton is a double . One for the winch on front, one facing rear for the pump and has a shaft to the pump. You cant mount the pump to the pto.

I agree about the steering. If you think its hard to steer now, with a plow hanging on the front of it, you will need the arms of a Goliath or Samson to steer it.

Welcome to the green disease ward. Check the classified adds here. Just click on "resources" at the top of the page.:grd:

I have a five ton and a gas powered M211. Had started out with new fully charged batteries in both trucks. Both sit alot. They both will slowly draw down to dead if not started and run every couple days. I could'nt find the draw on them so I disconnected the cables each time. After that I put a...

Weight loss, the most difficult challenge. I am 6'2" and 300. It hurts. Stress at work combined with winter inactivity has me challenged. And the older you get the easier to gain. The more one weighs, the worse you feel and the joints suffer from it. The worse you feel the harder it is to...

I know where you're coming from Glen. After having foot surgery and then hernia surgery and a bad back, all in one years time, I was bored outta my mind. Fortunately I had a break between each problem. Hope this is a better year for you. Enjoy all you can. Keep drivin that truck when your stir...

Yes, Chambersburg location is gone. Call the Tennessee one.;-)

OR in my case the guy I bought mine fom, said not to use the rite side tank- its rusty. Yeah rite, the pump and lines were missing.

My dad had one of those and it was two wheel drive with panel truck body and barn doors on back. His was a 47. Flathead 4 cyl.

Kublos will sell them for $85 apiece with wheel 570-663-2805

I have an idea and go ahead and shoot it down if its not good guys. Get an air powered piston like on the old large truck snow plows. connect it to the glad hand and a simple valve at the trailer. Any input on that?

I dont think you can pull your own parts, but he would let you look around and he will remove it for you . Sometimes he has what you need already pulled and in storage. I have always come away from there satisfied. I see acouple five tons there now. Never saw that before.

Can you weld a long piece of strong steel on the 45 degree elbow and get it started turning that? then cut it off and turn with something smaller?

I found the most difficult part was getting ALL the air out of the system after replacing the wheel cylinders. The M211 has 2 on each wheel! I have to do more on it. Now the five ton has 2 bad wheel cylinders leaking fluid. If you take it apart for that reason you would be smart to do them all...

Whoa! Cant go 4K on these!

I am partial to the M215's. Can you get it to eastern Pa? I would be interested. Send me a pm.

Dave, I still have your tailgate.:-D Remember me? You want the money back?

Yes the pto is rare as hens teeth. They are around but you have to search possibly a tanker or M215 if you are lucky to find one. I have a pump off a five ton that would probalbly work. The M215 and the 5 tonners were simular underneath, the bodies are different. And abt the camo scheme, I dont...

Ken Kublo: Email: kublo@pronetisp.net Phone # 1-570-663-2805