Search results

I do but it's on another M1009 that's not running. I need to get it off there and put on new truck.

Ok, I won't use any. Got bolt out with easy out. Putting brand new bolts in. Will be getting the bracket off my old M1009 and putting on my truck very soon. Thanks everyone. Sent from my SM-S908U using Tapatalk

Haven't heard anyone talk about this. Would it be beneficial to put a lock washer on the new starter bolts? Sent from my SM-S908U using Tapatalk

Hum ok never would have thought the bolt would be loose enough for that to work. Thanks Sent from my SM-S908U using Tapatalk

Thanks that explained a lot.

Hi I'm going through this right now. I'll find out in a few hours if I can easily get the broken bolt out.

Hi yes I'm getting new bolts. Just hoping I can get the broken bolt out. I'll try the chisel route first.

Just had a starter bolt break off. How hard is it to get the broken part out of the block? What size easy out do I need? Thanks for any help.

Thanks, as soon as the weather gets a little warmer I'll try these things.

Thanks for the info. I'll give the greasing a try

Hey All, I'm sure others have seen this and wondered what the fix is. When I start to drive my 1984 M1009 the Speedometer bounces all over the place. After driving it 15 or 20 minutes it stops and starts giving the actual MPH. Wondered what I could try to fix it? Thanks

OK thanks

This link appears to show the outside handle crank I need? It looks like I need another piece to attach to the outside crank?

Hi All, on my 1009 the rear window will not crank the last 1 inch or so. Awhile ago I purchase in the box a brand new interior mechanism from a guy. He said it would work. The problem is the part on the interior mechanism that connects to the exterior crank is different. I purchased a new crank...

OK Thanks I'll check that out.

OK I'll check it out too. Thanks

Hi OK thanks. I'll test with my voltage meter and see what it tells me.

I have a new rear window interior mechanism. It seems to maybe not be standard? I've attach a photo of what mine looks like. I've bought the crank handle from LMC but it doesn't have the correct interior part to crank the rear window mechanism properly. Anyone have any thought on where to get...

Hi All, My 1984 M1009 has a left rear tail light issue. At first the whole left tail light, brake light and turn signal light didn't work. I found the ground wire has rusted off. I fixed that and now have a brake light and turn signal. But the left tail light still didn't work. I thought ok...

Thanks I have some I can replace them with. If I measure right on the glow plug I thought I was getting 24 volts there and that meant they worked? Is that correct?