Search results

iam a nys inspector nys date base is kinda screwed up it took 3 times to get mviyn putt in because it doesn't under stand the military vin# my m1009 come up as a Gasser too and my new m1008 came up as a Subaru....don't know how that happen but it was a messy paper work thing

My M1008 put new shocks front and back newfront damper to stop death wobble. Installed troop seats that were hanging out in the bed. Reinstalled the glowplug card and 24 volt resistor. Oil change rotation and balance of the tires. Put disesl treamt and filled the tank no its all ready to go...

get out a tester and test battery's and work your way back to fuse box

I would just replace it if its clogged $15 part up here

i havent a clue the truck came with alot of CUCV Electric books

Ok will do thank you I got the gp system duagnosis book from cucv electric

I would check out the vacuum modulator see if its clogged pulling that much vaccum it sits on passenger side of trans

Thats exactly what he did ligyt blue to button and grounded and rest of gp system is exactly like the one in my M1009 I just wanted to double check before frying suming thanks

Recommend replacing all vacuum hoses and then try if not check the vacuum how much and the vrv

Ok guys I know its gotra be asked before but im gonna shoot. .... my M1009 is 12 volt set up for gps and uses the gp card (it has no resistor bank on the fire wall other wise I do normal 24 volt) its been working perfectly fine now my m1008 has a push button the former owner put in can I just...

Live is up state ny both my trucks have block heaters found that if it doesn't have block heater its a bit harder start just my 2 cents

Alot better deal then I got for my m1009 ill tell you lol

1800 it wasnt runnibg when I got bc the guy broke off tge gp in the pre chamber and didnt have any idea how ti get if out lol runs really nice only 2 problems had to replace vaccum pump and have to replace value cover gasket leaking on the manifold

Ok thanks but what about cycling gps wotch what the card dose

Ok bought m1008 the guy took the 24 volt resistors out and jump by the looks of it then he installed a push button gp .. now im just confused bc the push button attached to the light blue wire off the gp module and then grounded to the body ... I dont see how this working if at all... last 2...

im interested I have m1008a1 and m1009 willing to come down and join the fun

Sweet truck ya got od green

yes they do lol now looking at m1028 mechanics box on the back

hey guys I just picked up a M1008A1 it has 48962 on it had a few problems battery's dead glow plug broken in the pre-chamber a little rust in the cab corners other that that pretty solid. it came with bows and cargo cover and with troop seats pretty cool truck everything works and runs great...

Thanks im not really good with tread and blog stuff