Search results

so... what should the gauges read for low and hi pressure when temp is in the 80's...?

Ohh yes they (HOA) know of course, it's not like a Fiat 500 if you know what I mean. I will do the test you suggested on Monday.

Could it be that they just need to be greased...?

can anyone suggest a part number or a vendor? (are both joints the same part number?) I am not very mechanically inclined and afraid of buying the wrong parts. 2007 M1151A1

it seems to be coming from here <---- in this video it is more evident

Mark.... not too sure what you mean by "do the same thing"

Just like you can hear between 0:29 and 0:31 the transmission makes a clunking sound but it only happens in the morning with cold engine. It sounds like someone taps a steel part with a hammer. https://youtube.com/shorts/edBbsYNulwI?feature=share Any clues...?

in my case also the rear blower is always full blast and the HI/LO switch only controls the front blower

If the valve is like the one depicted in #66, there is no right/wrong way to install it, that is the one I have and it either stop the flow or lets it through.... (or anywhere in between) regardless of the "Direction" you installed it in.

DREDnot, can you give me a link or more specs on that bulb so I can look for it on the internet...? And why does it need to be REVERSE POLARITY....?

ok..... ABOUT SELF-CANCELING ok I do have self-canceling and it works very well, the problem though is when you are going straight (Maybe on a highway) and you decide to shift lane... maybe 2 lanes, you put your turn light and because you never steered hard enough the self-canceling gizmo will...

does anyone know of a turn signal beeper you can adapt to the Humvee turn signal lever or in lu of that, a super bright light so you don drive around like a dumb ass....?

I must say: SUBSTANTIAL IMPROVEMENT in the A/C temperature after installing the valve, also I have to say that previously I had disconnected the servo and manually pushed the little lever all the way forward but realize that it DID not slide all the way even gently forced with players...

I heard on this video on youtube that the guy fried both the Smart Box and Glow Plugs with a battery charger. I did not elaborate but that has me very concerned. Is there some type of battery charger able to do such damage...? (providing the voltage is at 24-28V of course)

I noticed something very similar to that on mine too.

ok so just to let other people know: After installing the valve depicted in Post #58 in line, WHAT A DIFFERENCE !

does that make it a 3/4 OD...? or even 1"...?

do you happen to know the tube diameter so I can buy some clamps...?

or maybe just put this valve inline and shut the valve off.