Search results

Hey Tinstar, are you selling this radiator on ebay? Ebay seller 1310 surplus- same photo of box with same rips in box...

Thank you! Ordered LMC’s shroud.

Anyone have a source for a new radiator shroud for a M1009? Mine is cracked and missing pieces on bottom. Thank you for any input!

Anyone have a part number for "filter head"? Any photos of your install? I work well with pictures! And thank you for your input. I will start with that.

http://www.grote.com/wp-content/uploads/2014/10/Grote-5-x-7-LED-Headlamp.pdf

When I park on a hill or driveway nose high and the truck sits for a few hours - it has a difficult time starting. Just cranks away. Only when i put it on level ground does she start. Anyone care to venture what the issue might be. Warren

I have done both types of paint jobs. Behr is easier all around to spray with an airless sprayer. The results are extremely CARC like. Spraying vehicles with urethane - You need different guns...primer gun, paint gun and/or tips. My SATA guns are top of the line HVLP and are expensive. Then you...

FYI Commercial Driver Handbook, Department of Motor Vehicles California, Effective January 30, 2015, Commercial Drivers no longer need to carry your medical examiners certificate for more than 15 days after the date it was issued (by the medical examiner) as valid proof of medical certification...

Make friends witha Napa employee...my brother's wife works for Napa as did I. The Distribution center cost plus 10% for employee purchase was $163 each. I put them on my H1 and am doing my two M1009's makes a huge difference and casts a beam that has a horizontal limiting line. The high beams...

M1009's are notorious for breeding. Just last week, another showed up in my driveway! My friend purchased this low mile (33,000+) M1009. The engine was beautifully clean, frame was nice, but...after driving it for a few months he lunched the motor. I bought the "project" for $800. The oil pan...

I put a set on my 2000 H1 Wagon, replacing the stock aluminum wheels. You can definitely feel the difference in weight (unsprung). A bit slower going up hills, takes longer to build up speed, coolness factor? Undeniable!

If you buy the floor pans, just cut out the areas you need to replace from the new panels...unless you have no floor. Use magnets to hold it in position until you tack weld it in place. And yes , they do take some tweaking to fit. Nothing that a body hammer, dolly, and a pair of pliers can't fix.

I got it! Its a gym membership kit...completely adaptable to many vehicles, with protein enhancers, Install is simple - climb into your truck! Liability? You lifted the weights... okay, back to my oxygen tent.

Okay thanks! just ordered from Hummer Parts Guy. He said the exploded view of the wheel doesn't show the pilot washers, but that if there is play, it will eliminate it. he suggested the same amount as you, spaced every 8 bolts. Thanks for the reply.

Quick question...do the 24 bolt humvee wheels need the pilot washers when bolting the halves together? My rims did not have them and when I put them back together there is lateral play. if so, do I need 24 of them? Thanks guys warren

They need to designate a liaison, who can then procure mil items.

i used Herculiner on my Deuce floor pans and trans tunnel cover. Two coats and it comes out nice and uniform. It IS a nonskid surface and yes - on your knees with shorts on Herculiner could be painful. Attached is a photo of my M35A2 trans cover. Good stuff!

The Oshkosh Mk.48 series of articulated trucks began life as the Lockheed design, named 'Twister'. Later the Oshkosh Truck Corporation signed license agreement with Lockheed and developed it into commercial design. In 1983 it was ordered by the US Marine Corps as the Mk.48 LVS (Logistic Vehicle...

Viewing the photos is more of a pain now. Before you didnt have to open the entire auction, you could just bring up the photos. Bad change number one. Two, you have to reduce map size in the search locations to see the complete picture. bad change number two. Find Items is gone in the...

Red o-ring for 24 bolt wheel is NSN NUMBER 5331014171043 RCSK17877 "O-RING, WHEELS ASM" This info was provided by Hummer Parts Guy and verified through a military exploded drawing with part numbers. Attached is the PDF for the 24 bolt wheel with all the part numbers. Enjoy!