Search results

Today I removed the M35 propeller shaft assembly between the transmission and the transfer case. The fasteners loosened up and the assembly got unfastened and jamed . Cleaned and GReased the u-joints for tghis assembly. The transfer case linkage is bent, and hose connection fitting on the...

Welcome from the badlands of Loxahatchee...last Confederate holdout....

Thanbk you Another Ahab, and rustystud. I want to somehow use this as a fuel tank, perhaps for mY MEP005 GEN SET...

Today I got an aluminum 600 gallon fuel tank formerly used used by the Forestry Department converting thier deuces to a brush trucks. I dont recognize the access fittings on this tank? How do I describe thwese connections, or must I convert them?

Welcome from the badlands of South Florida...Last Confederate holdout...

Well today I finally got my friends M35 to start! After installing a repaired fuel injector pump, I proceeded to do the timing. His engine is a LDT465-1 and SO i CHOSE THE ENGINE DAMPER TO BLOCK TIMING ALIGNMENT ACCORDING TO THE DIAGRAM OFFERED THE TM'S But the damper doesn't have the exact...

Applied marvel mystery oil to two stuck M35 engines, filled up the cylinders to the top. added every day for a week and a half. For the engine on the stand, I uswed a crowbar to move the flywheel, and it turned ! For the engine in the Police truck, I used the starter, and it turned too! I am...

Welcome from the badlands of South Florida...

I like the idea, and might install one on top of the fuel tank...

WEll, today we finally got the fuel injector pump out. As you can see in the pics, I had to utilize severe persuasion to back the pump out of its gear casing, ( i am sure I removed the pumps rear mounting bracket, who put it back? ) Helping me is steel soldiers member CHEVYC60, better know as...

The M353 gen trailer belongs to ROY THE TERROR, who is a steel soldiers member in Loxahatchee. Yes it sure does bounce. inn these pic you see Roy (with a cap) helping me and the General ( a member from Hollywood, florida) starting to remove a fuel injector pump...

Helped my friend deliver his trailer from Fort Loxahatchee, to his yard. First pic shows his trailer in tow by my Truck 3. Pic three shows the owner of the m108 connecting up to move the trailer. and M108 wrecker...oerator of the crane is Roy the terror..

Welcome from Fort Loxihatchee...last Confederate holdout...

Welcome from the badlands of South Florida...

Take the window cover off the side of the fuel injector pump, this is the cover to which the STOP cable line is connected. Verify that the movable tang, to which the STOP cable is connected to, is moving freely left and right. fasten a rubber band to this tang in such a way as to have the tang...

Where's the rest of the truck? Hope to get this engine running as spare engine # 3 ...Shall part out the tranny and transfer case , and...

Actually, a neighbor had this mounted on a military generator trailer reportedly entwined and irretrievable among the bushes...Once he challenged me to get it out, as you might imagine, I simply connected my tow chain and pulled the trailer, ( and alot of his greenery) out into the open, and...

Oh! What's in the box? A birthday gift? Lets open it and see...I'll just place this next to my other spare engine...

I hope to make it....

I just got this Deuce from the POLICE with 10R 22.5 tires on it, I hope I go faster too...