Search results

The Tm's download very slow for me and I would like to know what TM's I need to open for the removal/install os my cab on my duece. Chuck XD Fan

Find a Grainger Supply and they have hyraulic filter that go down to 3 microns. They come with the filter mount. I use two in linw with each other and that should do it. Just whipped up a big batch today. Chuck XD Fan

50/50 umo and deisel. truck loves it. Chuck XD Fan

mine is on the switch and is bright..

Re: RE: Air shift question Yes, I have done it bith ways.

I have flipped the switch on the dash on my M35 a couple of time for the air shift front axle. But should there some sort of clunk or something other than the light coming on. Will it "crow hop" like a regular 4x4? When I have flipped the switch it gives me no other indicators the front axle is...

My VIN please NK00ZR-72 0525 25652 Thank you Chuck XD Fan

Hey Ken, be sure to take the proper forms before procuring said airhorn. LOL! Chuck XD Fan

I didn't know the line had broken completly off untill I tried to make a hill and she was blowing a lot of fuel outside the L/F fender. It looked like I threw a rod! Ran like I threw a rod, without the expensive noise. :shock: Chuck XD Fan

Went to lunch with the wife and on the way to pick up some paperwork from the office "Dixie" developed a mis-fire. Not good for a multifuel. :shock: Got to the office and found that the No.1 injector line had started to leak around the IP, like a flood! :shock: Making a panic move I went down...

In tank pumpis working great. Truck is running smoother now...???

I took said advise on my leaky fuel lines from the pump to the injectors by loosening the two that were leaking and re-tightening them. That fixed the leaks perfect. Now I have a long start problem. If the truck sits for more than 10 min. or so it will take several seconds to start. Before it...

I work at a car dealership that has to pay to hall off old oil. It can run in the thousands every month. So they love me. I am useing a 3 micron setup from Grainger and a transmission filter that has a magnet. Chuck XD Fan

One of a hundred questions I have about my new M35A2C. I have a new leak around the injector pump and it appears to be injector line related. Do I try to do what it says in the PS mag. or do I replace? I guess it boils down to $$$. One of the lines is leaking at the injector and running down to...

When I put on the turn signal onmy M35 it will hang for about 4 seconds and then start to blink, but, will get faster and faster and then won't come on at all. Plus, when I turn it on the second time it won't work at all. I have consistant brake lights. Ideas? Chuck XD Fan

Oh, ok. The thing, I mean "Dixie" drives as straight as they come. One hand on the highway WFO... Chuck XD Fan

I noticed tonight that the front rear axle is off center about 1" from the back axle. Is this something that I can loosen everything up re-center the axle and tighten everything down? Chuck XD Fan

I had axel bolts where loose over and over. Lock nuts were no good. Re-seal the axel and some new lock washers and good to go. Chuck XD Fan

Used the search function to find out how the Tx. guy's got thier plates. Some have reg. as "classic veh." but I am being told you can't have them on anything over 1-ton. These are going on M35. Some insight on this would be helpful. Chuck XD Fan

If that doesn't fix then what is the next item of intrest? Thank you Chuck