Search results

nice looking dropside .have fun with it

looks good do you think a 10ft plow will cover the track when its angled looks good on there i like the 11.00s on there to i have consided painting mine tan looks easier to touch up

why not see how it does in the mudd i just put a 120 hp turbo mercedes diesel in my ih 2410b i might have to bring it down to ride some wheelies with strecth and them guys

turbo multi fuel are the way to go i like the d turbo since it gets boost lower in the rpm range and make more boost in the end but i still like the sound of a c turbo i would look for a air shift front and suspension seat also look for one with heat and a hard top also drop side bed are very...

they dont look right on there take them off and give them to me so you dont have to worry about what to do with the other one :roll: :wink:no i really think it looks good there i would put the one on the other side if you want to you can put an access hole in the bottom of the box to get to the...

run it without the filter for test purposes. i to have 410cfm stamped on my stock filter and thought running a k&n would really help lower egt since i have my fuel turned up i am really interested in seeing the egt difference betweeen stock,k&n,and no filter at all. i also wonder if it is...

i will be there to . i like the date we had last year i'm already there in my mind:roll:

15.5s last longer on pavement but 395s are better offroad and the will let youy know if you have bad wheel bearing but singles with the hubs flipped doesnt put anymore load an the bearings

dont you mean a good influence.i have 15.5s on mine stock rims accel is great stopping could use some help.but not to bad unless it.s loaded but other than that it is the best mod you can do top speed is a big help higher load capacity and way better traction better mpg are just a few of the...

did you use a torque wrench to torque the flywheel down .did you check the pilot hole in the crank for wear? were the dowel pins both there and sticking out the proper amount and are the dowel pin holes in the case in good shape ? there are several things that will cause a flywheel to crack...

well since this is a deuce not a five ton i will stick to bolting or riveting on my frame since as far as i know deuces are tempered steel and that is why they are not welded on from the factory and why they is no mention of it in any tm .ok you can weld a car frame or a go-cart frame but this...

i like all the fab work looks great but welding to a tempered frame is a bad idea at its your truck do what you want but when your frame breaks and kills someones kid on the school bus you ram into dont say i didnt tell you .i just cant see doing all that work only to short cut drilling a few...

make your own even if you could find em it would be a pain in the butt to put them in .i make them all the time at work make the bends at the trans side then slide them through and finish the bends going to the top and cut to lenght and flare the line at the rad.

ya i think there should be a factory recall on all deuces and they can yank out the ldt and throw in an lds for all of us :roll: i need one for mine:twisted:

i use a concret mixing pan they sell em at menards they hold like 15 -20 gals they messure like 2ft x4ft and about 6inch deep they are great you can drain front and rear at the same time no mess .i just bought a mercedes for the motor it had a veggi oil kit on it and had a 5 gal bucket in the...

check the heater hose temp when it is up to opp temp if one is hot and the other is cold you have a plugged heater core -very common or possible bad heater bypass valve

love the pumkins and you went all out on the lights to great job:-D

maybe you can angle mount the bed to match the hood .i say it you have the money do what you want i might end up bobbing a a2 some day but an a3 not gonna happen i think they have ugly truck laws hear and i'm sure it carrys a big fine:-D

i know maybe we should have a 4x4 section and a 6x6 section cuz i kringe every time i hear the word bobbed bobbing an a3 is like putting french fries in the microwave five times they have been reworked from good to bad already now you want to make it even worse:roll:

i think it.s like buying a quad then cutting the right wheels off it and making a motorcycle when you can just buy a motorcycle if thats what you want