Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
decon mount is the same you just use the holes in the bottom instead of the back and fire extingusers i though were all horizonal the mounts are pretty easy to come by the extinguisers are another story
i was thinkin dampening it might be a problem since any change in load would cause a uncontroled bounce but i was planning on doing a scissors setup which would limit it and the raio would help the bounce to
that would be cool cadillac motor ac power windows and door locks he could crome out the thing paint it pink and everything :roll:sorry got carried away on the caddy thing it would be different and pobably work nice till you went to the gas pump at a whooping 2 mpg.i would just go with a...
if he lelf it how it is this post would be in the deuce section not the deuce mod and hot rodding section:roll:i'm not one for bobbing a prefectly good 6x6 but engine mods are nice as long as you dont mind spending alot more to opperate the truck .if you want to build a fast mud truck just...
people have put all different motors in them but a small block probably not high on the list of motors i would choose .these trucks are heavy even bobbed you probably want the torque of a big block and a 350 trans isnt gonna hold up very good to that kind of weight and the transfer case in...
i was thinking about doing that with a m105 and thought about using a air bag from a semi to do the lifting since they can be had fairly cheap and lift huge amounts of weight .i would use a two valves one to fill from the air supply and one to vent to drain and lower the bed :roll:
my tank has a drain on it from the factory it's a big square drive plug .i wouldnt put anything else there cuz it will surely catch offroad and rip the fuel tank apart then youll have a big problem:roll:. if you dont want to use the drain thats there you can get a hose and a fuel pump take the...
many drag race cars run 16 volt batteries and alts to give the ignitions and starters more power to keep up with the heavy demand placed on them and they help the starter hold up not hurt it's durability.most electirc motors will hold up to an overvoltage situation for quite a long time...
not sure on the ac motors but i know for a fact that you can run a 12volt motor an 24 volt or a 6 volt motor on 12 volts with no problem cuz i have done it .yes relays and solonoids are a different thing since they dont work the same .yes both have winding but thats where the similarity stops
actually an ac motor is wired the same either way you are just changing the power suplied to it i.e. switching a neutral for another hot thus giving it 240 instead of 120.and yes running it on half of the amps but still the same motor and same wires in the motor .i think you are refering to...
you use the neg from the first battery and the pos from the second battery otherwise youll only be getting 12 volts which will cause the batteries to discharge unevenly and then it will overcharge the second battery and kill both batteries
remember when you run something on 24 volts vs 12 volts it uses only half the amps.i had my pump- scissors setup on another truck running off of 12 volts and it went slllooooowwwww and got really hot when i ran it off 24 volts it fixed it fast and cool .like i said i've been running it like...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.