Search results

ya its fun when the return spring breaks mine broke when i was pulling into work in a tight spot next to the bosses truck .full throttle wasnt exactly what i needed right then:roll:

thats the one:-Dits like a little piece of heaven

ya i'd say it's lite in the back:roll:maybe you could make some counter weight boxes for 1/2inch plate to fit in between the frame rails in front and behind the fifth wheel then fill em with concrete .you could put some pins sticking up for them to sit on then just pin em in place.and you...

plus putting more weight on the back will make the truck way harder to steer off road .by making the rears have more traction it will try to push the fronts.think of your truck as a front wheel drive car rather than a rear wheel car.you want to put the weight on the steer tires since they have...

cranetruck how much weight is on the front as compared to the rear:?:cuz those tatra trucks are set up pretty similar and with two axles in the front it helps them alot of times not having much weight on the back. like when they are going over hills and when being flexed out it lets them balance...

the pipe is 3.5 inch so dont think that one will do you much good :cry:expandible is going great about 70% done i have the bathroom in and the beds and dinnette just need to do the kitchen and put the finishing touches on it.he's still not ready to give it up yet but youll have it soon as its...

yep dynomax bullet 3.5 inch from summit about 40 bucks fits right under the shield easy install i have one on my truck and love it

i was amazed how good that 5ton tractor did without any weight on the back.seemed like the only trcuks that went straight out at haspin were the m109s and the 818.it would be cool to have different beds you could switch out when you need the truck for something other than pulling a semi trailer...

nice looking truck i could have really used that at haspin it would have save alot of poor little shear pins.and a bumper to

dang i was under my truck looking for the ari pack couldnt find it :roll:thanks for clearing that up for us

just read your dash plate it tells you what pressure to run in different situations :roll:but bigger contact patch helps out greatly

ya iwas thinkin of doing my snorkel the same way a 90 then a 45 looks good .top looks god now you just need a sun roof it there:roll:

dual gun mount goes there

ask her to get out and look for the exhaust leak so you can fix it . when she gets out go find a new without that pesky complaining problem.remember we have two ears and one mouth so we should listen twice as much as we talk :roll:

sounds like a good deal to me:-Di'd jump on it .i would love to add a gasser to my collection they sound strong

i have a set of the winch brackets if you need em :roll:the winch is the same one used on the m35 but the handle on the drum brake is a little different

nice job on the intake tube looks factory.how many leafs did you have to add to the right side to keep it level with that big ace muffler on there

ive always wanted to be able to run the aluminum pins i was thinking maybe drilling the shft for a second one near the end would give you enough pull without breaking things.i'd be very curious to see the difference in what it takes to shear two aluminum pins versus one soft metal or a grade 5...

i was dragging fours deuces with my steel bolt and one snatch block.sw i think i had the aluminum shear bumper on there the way it got ripped off:roll:

nothing to be ashamed of long wide truck short narrow trailer makes anyone have a hard time:roll:plus no power steering doesnt help :!:i would rather back a 40ft trailer with a deuce with mirrors than back a 105 with a deuce with the best mirrors