Search results

how about the pics?

RE: Re: enclosing the genset That is a good idea, but how to hinge it? I do not see how to swing it up, there's not much room, can you help me understand? In any case I posted the pictures so far here: http://www.bunkerofdoom.com/mil/m35/gen/index.html I have done a little more work since...

Not looked at a map lately, is OKC on the way from Dallas to the park?

fits in the corner if you have a hardtop. The hook could be menacing I suppose, but it's way in the corner away from personnel. http://www.steelsoldiers.com/modules/PNphpBB2/files/100_2312_208.jpg

Nice!!

RE: Radio setup Cool! on the plug. It's more convenient than hardwire and better than resorting to heathen plugs.

short answer: use diesel in your multifuel engine when the FDC is bypassed. long answer: Supposed to burn diesel according to the stickers on the Toole-rebuilt engine with FDC bypassed that says "diesel fuel only". That sticker came from the army after they did the work. Their work including...

did any flames shoot out of the stack?

Might be that John Colwell still has a few that looked in fine shape, for 175. In Texas though. Never seen one for $50.

de-splined or lockouts won't do any good for mileage on a sprag-type because the driveshaft and diff gears will still be turning and that is where the energy is used up. They will help with the 'wig-wag' of the steering when turning. I have been keeping my splined hubs in a box inthe truck just...

RE: Re: enclosing the genset About the batteries, I want to put a small spin-on external oil filter where the genset battery tray is, and also, why have to deal with yet another battery? I don't think there should be a charging imbalance issue since if the generator charges only the one battery...

enclosing the genset Got the beast mounted, plumbed, and powered up today. It starts using the truck's "lower" 12V battery and then recharges that battery. After a few stutters due to getting first-time fuel into it from the truck's tank through the new lines, it hums right along. I used 3/8"...

Could one hook up a bypass for the FDC, and have the FDC connected at the same time? Just putting a valve in the inlet to the FDC and in the bypass, so you could run straight, or run FDC if you wanted just by opening and closing a couple of valves? probably no reason why that would not work...

It is very nicely done!

no 'lectric brakes for me.heck, the brakes on the M105 do not work... in any case I have a pigtail that will plug into the back of the truck, and can adapt the 24V to 12V with a little box with a few electrical things inside.

Re: RE: Engine Prelubricator what is the thread on the deuce oil pan plug? kinda big-ish..

Those look lie lots of fun! Can you say about them? what engine, trans, 4x4 axles, other thingies?

Haney Electronics? 817-309-2220

RE: Class 4 receiver hitch That's a very nice job! I have to admit is is more versatile than my box hitch. I know nothing about hitch classes, assuming 5/16" plate box attached with the pintle bolts and the pintle shaft bolt in the shot below, what class would this one be? I only pulled a...

well it's officially on my calendar and someone seems to have pledged a deuce transmission (if I am not mistaken) for a prize!