Search results

They hate nontax income! EUC just deters bidding, keeping the price lower. Brilliance!

Just heard the frogs in my pond today. Now I know why. Thanks!

Well, the bolt holding the line on was a little loose. Cleaned the area up real good and after tightening the brakeline bolt I pumped the brake pedal a bit hard, and no leaks. I am ready to go to Columbus and recover my M1102 and towbar kits out of Columbus now.

Well, it's a bit rough. It has sat for six years with dirt in the bed. The battery box is wasted, both steps are rusted bad, right windshield and left door windows are spiderwebbed, winch and it's driveshaft is robbed, tailgate is wasted, some rust holes in the bottom of the bed reinforcement...

Does it look like you left your windows down?

Replaced the H4 headlight bulbs with new old stock Volvo bulbs picked up from ebay. These are made in Germany, so I trust them to last longer than the China made ones I had in there. I ordered a spare just in case.

Thanks. Without being there, I couldn't tell if that was plugs and wires or lines and injectors. So that odd shaped thing is a distributor?

As for the body metal, I will check the truck out tomorrow. Here's a couple pictures of the engine. Is it a gasser, or multifuel?

Thinking about an M51 IH, I found for a very reasonable price. This truck is way before my time, as I drove an M817 when I was in and now have the even more recent M929A2. Are all of these old beasts powered by a gasoline engine? Should I just pass on it with it needing a head gasket (and who...

Some locations with GL now have appointments being made online (only).

True, but funny worse case scenerios.

This inspired me to crawl under mine yesterday. All was good except a class II leak of brake fluid where right brake hose attaches to the caliper. Checked the fluid level and only down 1/4" so I tighten it this weekend and it will wait until I csn get a helper to help bleed the line after...

Hauled a load of firewood home today. The local sawmill has a firewood machine that cuts and splits and they feed it the smaller diameter logs that I suspect come from clearing pipelines. All hardwood and $50/bucket load on the front end loader. I use my 5 ton regularly, but every time I...

I am as newb as it gets, being I just made my first purchase last week. I also had to verify the cc info for each auction. I never won til last week, but tried previously, and each time as I tried to bid I had to reverify the cc to use. The one I won it said something relating to "if not...

I was thinking one for each powered MV I have. I think a generation back NVGs only cost about $4k.

Agreed! I need two for a good excuse to get the NVGs.

Went and looked at the trailer and I confused trailers. It was on the M101A1 I got out of Columbus, OH. The stenciled mark is about 6" forward of the fenderwell. The one on the gate is about 2" left of center. I counted the drilled holes on this unit previously and there are 150 holes in the...

Camaro??

Do the '09s have a bench seat up front? I know he mentioned the ones he has don't work in the back of the blazer, but if it's bench up front (as I thought), it should be the same.

It does appear as if something was bolted in there!