Search results

you have another set of guages mounted under your dash. and you have a black wire running outside the wire harness to the probe than Mangus is refering to for the temp that is mostlikely running back to the guages. That second wire has been eliminated.

I used WD40 last Dec in 30 degree weather to fire it off, now with a new flex plate and glow plugs and temps in the 70's she's fires right up.

One of our Motor Sergeants cut down the frame work and had the cover cut and stitched up the seams to fit. It didn't take a lot of work or expense and worked out well.

I just put in Wellman 070's today, and cycle time is about 12-14 seconds, and she fires right off,I don't know what I took out but they had a barrel type connector, I had to change over to the spade connection.

Yup paint, overspray on go pedal, and like Maddawg says heater motor not painted, and passenger side still mostly green.

Wish I could but I have to work.

I don't have a spare but maybe some one might have a unit they are parting out.

That,s missing the bleeder screw, its plastic and has a rubber stopper on the end, I don,t think you can use any screw.

One bolt was broken in the converter, one in the cab with the inspection plate when I got it from GL, the other 4 missing, the flex plate was not broken but the holes were elongated. I have not driven this yet, so I'm not sure about the trans, nothing big was in the pan and the fluid was...

I bolted in the new flex plate today, which I got from NAPA, 6 bolt 139 teeth Part #600-5041 a perfect fit and exact replacement. Since I have not ran the engine more than 30 seconds because of the broken plate and torque converter I wanted to hear it run a little longer. So I jumped it from my...

What are the specs on it.I run an outdoor power equip. dealership In RI. Might find some one that can use it.

Whats a deer lease? Must be a texas thing.

Thanks for the info.

I removed the Trans and TC as an assembly today using a fork lift with 5' extensions, to replace the flex plate and broken torque converter bolts. My question is can I install the trans with adapter plate then install the TC is there enough room to bolt it all together. The truck...

Not many in RI either but if I see one i'll let you know.

Thats a great idea, looks good, love the rear porch. I saw a few of those trailers on GL last month and was trying to think of what to use them for.

I towed my M101 with my E250 had a pintle with about an 8 inch rise, did not even know it was there.

You need really big tires to make it float!

Welcome to the site, alot of good info here. I have a M1008 I'm working on just a little north of you.

If you can find someone with a slide back ramp truck he can winch it up onto his and slide it off onto your trailer. Check out a few of the local tow companies in the general area. Should be safer than trying to pry,jack, lift,pull. I always look at a new job I have to accomplish as, how bad...