Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
shipping
According to the book it's about 19 foot long and 7 foot wide, and has a curb weight of 7,300 lb. I would think a 1 ton and a trailer to match would do nicely. Wayne
description
Hi Dave This is NOT a flame but just one example of how a easy a description can go wrong. I just looked at your link and checked the M35 section, almost all are saying the seats are "Air-Ride" and while they may be, I suspect they are really spring seats. BTY The new 24P calls them...
GL
Well I don't like/want to defend G/L but they do tell you up front DON"T TRUST ANYTHING IN THE DESCRIPTION GO LOOK. I don't know how you can be more plain than that.
That being said, Beetle was disappointed in the 60,000 miles showing, if it was right 60,000 miles is low for a diesel. If...
GL
Did you read the contract that you signed by default when you bid?
It says
Information provided by us is not guaranteed and should not be considered as a substitute for your due diligence and physical inspection of the property.
AND
If property is not removed within the specified...
truck
Which model? gas engine or diesel? If diesel, Mack or Continental? The M39 Series trucks will weigh between 18,313 to 34,690 lbs. That is with both axles. Add 714 lbs for winch.
For the other question.
1. You could move it with a 1 ton but a better question might be, Can I stop this...
Boom
The longer the reach would mean a lighter load (without extra support)
Does any of the sections work with the hydraulic?
I think RAM said the hydraulic fitting on some models are really hard to find.
Wayne
covers
Thanks, here is a short .pdf for making a fixed loop (eye splice) on the rope-end that I found on the web. Wayne
http://ImageEvent.com/wharris19/manuals/ropesplicing
price
As is where is price is:
number of pounds x price of scrap steel in area to start.
Sitting for 15 years, engine might just be a big boat anchor. Wayne
questions
(1) prime the fuel system, the Ops says to use the hand priming pump on the dash
I've not found it useful, just turn her on and hope the batteries last. You didn't ask but mine (M816) cranks and operate with two batteries just fine.
3.) Is the fuel tank selector switch a manual...
wearther
Seeing how it's a diesel and if you have compression(@ 3,000/ 4,500 psi) and fuel, just how long do you think it takes the air inside the cylinder to reach combustion? Wayne
cranks
I would think in the middle of June in NJ, even with no glow plugs working they should start. May take a little extra cranking first time of the day. Wayne
HMMWV
You can always see Uncle Sam, he might loan you one for three or more years and his has guns you can play with when you get tired of driving. Wayne
motor
Any of these? Wayne
on this one, do a search for 24vdc
http://www.herbach.com/Merchant2/merchant.mv?
http://www.sciplus.com/singleItem.cfm?terms=12112&cartLogFrom=Search%20%2D%20Category%20Filter&CFID=574917&CFTOKEN=70688187
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.