Search results

I am installing secondary spin-ons on my deuce. I have changed filters before and have bleed the system per the 20 TM. My question is does anyone have a tip on the best way to keep the fuel from splashing all over when bleeding from the petcock (No. 11 in the 20TM)?

I have the 3/4" Earthquake and it is a real beast. I did start out with 1/4" air fittings and did not get good performance. When with a 1/2" hose and 3/8" air fittings and it works great.

I just installed a NOS set of parking brake shoes I got from Saturn for $72. They work great.

Get a stubby too! I got a stubby set and Northern Tool and I used it all the time. Goes to 1"

George at White Owl truck parts has anything you need.

FYI, they don't care about camera phones.

What specific type of outboard motor oil would you recommend and at what ratio? Also, by outboard motor oil I assume you mean two cycle oil.

Good luck. I hope this cold front moves through by then.:)

How do I know what numbers and letters to add?

I have been trying to submit the info needed to get an SR97 for my M101A2 to GL but they are saying I do not have the correct info. Bottom line, my trailer's data plate did not show a manufacturers name and only has a 4 digit serial number. They way they cannot process my request without a VIN...

I assembled one today patterned after Recovry4x4. One thing I am still unclear about is what to do when bleeding is complete. If I understand the design, the bleeder tank hose and the hose and tube to the M/C cap will be full. I understand how to deal with the bleeder tank hose using the ball...

Congratulations, don't forget to list your consulting fees!!! :-P

105 = 1.5 ton

Thanks all. Any recommendations as to who has the best quality silicone boots?

I just received two new universal glad hands from George at White Owl truck parts. Do the same glad hands that are used at the rear air lines, the same ones that are on the trailer air lines? I am not sure whether there is a difference in the two.

I have read just under one million posts about deuce boots and many different opinions. Since these post are sometimes dated, I would like to know what the most popular boot choice is today. I am getting ready to follow "Step x Step" on my front axle and need to make a boot choice. I do not...

How do you create a list of theads you want to access in the future?

Floridianson, can you provide the dimensions of the piece that goes behind the retainer on your tool?

When I picked up my M101A2 I fabricated a hitch pigtail and ordered a receptable from Erik's. I has a ridge built into the round collar and the trailer plug only inserts one way. The receptacle on my deuce does not have this ridge. I will take a picture and post.

I moved the my wiring harness in the process of shortening my frame. I started to reinstall it today and realized I am not sure how to remount the trailer receptacle. The is nothing indicating which side is "up" The only unique mark on the receptacle is a small slit on the round metal sleave...