Search results

I "found" a 50 footer in my motor pool. I snached it up so fast, well not fast its heavy as heck. I have seen lots of long ones. Why we have them is because it a truck is dead 99.99999% of the time the trucks around it are all locked up and cant get in to jump so you have to reach out and hope...

for sure not stock. looks to be a filter and water separator. Take the filter off there should be a number on it so a parts guy can cross it/has the part. try a Napa or car quest.

is there a part number on the filter? Post a pic would help a lot too

RE: quick question!!!!! I I took mine off (the top gaskets) and soaked them in oil to soften them up. I had to really clamp them down to stop them from leaking before I did that. I do not know where to get the top gaskets, I know someone here has replaced them and will know where to get them.

I got the cheap one from car quest. the $50.00 can type.

RE: quick question!!!!! I I use the new ones. Never had a problem. there is a grove they slide in to. If you want you can reuse the old ones if you dont think the new ones will work.

I would guess around 4 psi

RE: What Yes Cranetruck has done it to his M35. Search his posts he did the full set up with heated tank.

I would just get some lumber and start cutting. damnedest thing happens.. I cut twice and its still too short.

what? I already see it!

I don't know why everyone says the seals are wrong. because there not! I have used at least 20 of the napa ones and the large can seal gasket works just fine, never had a leak.

RE: Re: RE: Re: RE: Not as much as a "road" trip, lol I also had my 5 ton stuck in my back yard for a couple MONTHS!

well here we go. I have seen the new set up and I'm sure everyone will like it. I remember the last change over and it was not that bad, this one should be the same.

prob just years of rust, dirt, heavy metals and could be some of the bug guts. I would not worry about it. Flush her out and Charley Mike (that's continue mission to you civy's)

Well I was going through the vids today and I came across this one. I have not seen or heard or any ribbing over this in quite sometime. I think this should warm things up a bit. http://www.steelsoldiers.com/index.php?module=pagesetter&type=file&func=get&tid=4&fid=file&pid=1

I got a good running 6.2 for sale .... out of a hummer so all you need to swap is the top plate on the injection pump and your good to go. 300 bucks.

RE: Treid to buy a Military Red Dot A/C for my HMMWV.... and I think there kinda junk, we have had two units go down in 400 miles. I think for the money you can make/get something that's a lot better

Re: RE: Looks like a good project...CHEAP!! she would have it all burned and start over.

RE: Re: RE: Re: RE: Re: RE: Looks like a good project...CHEA ..

could have a small air leak in the fuel filter housing (there crap). By the sounds of it your glow plugs are working. I would check for air leaks or just replace the filter housing with a spin on type.