Search results

BFG K02s were tested in Alaska and found to be pretty solid.

Check for shims at the hinges

Looks like you need to adjust your doors a might... mine are not like that at all.

this is a perfect fit for helmet top cross windshield seal. there are a bunch of different shape seals front to back the ones under the cap on the rear fenders are another one I am trying to score really just a square or round EPDM piece with VHB on one side should work to fill the gap. mine...

As long as the seals on the doors and across the windshield are intact it will be pretty dry.

I'll help with that. Amtech Helmet Hardtop (McClarin Plastics) it is where some crappy vinyl rain gutter was stuck on. No it did not come with it nor does Amtech/McClarin make or sell it...

Probably craptastic vinyl Rain Gutter... you can find it on Amazon if you want it on there. but it isn't original...

Rarely do I ever use it for a JACK mostly a "Winch" or just a tool to lift or lower an item like a bumper into alignment for bolts or something. But it works fine for a Jack as long as you are smarter then the object you are working with. Make sure you use all the movement of the handle never...

On the rear with an air lift bumper I used the Hi Lift Extreme 60 inch jack in the outboard end of the bumper.... but be advised whatever it sits on needs to be pretty solid so as not to slide. when I used it that way I also had an aluminum race jack under the lower shock mount...

Same plate as a Small Block Chevy... CHEAP to buy... about 5 or 6 dollars I think for a steel one. Probably available at any parts store... Looking on Amazon an aluminum part is about $14...

I removed the Mechanical completely. and put a closeout plate on there Just like on racecars of days gone by. So Electric only and it is a bolt on an Easy plug and play... I can keep a spare in a vacuum bag in the Under Seat area...

Lots of Military Radios are 12V... Older PRC-126/128/ Scope Shield, PRC-77 is 12V, LST-5 and the KY57s back in the day, there are plenty of others, perhaps not the VRC stuff but the power cable has 12V and 24V on it.

Just dismounted a torn up tire. and the Rubber Hutchinson Runflat was marked "Radial" on the outer flange which was quite different than the ones I usually see because this flange marked Radial was a separate part of the rubber runflat. I didn't take a pic but I will stop by the storage unit and...

I actually have a Holley Red Pump on the frame back by the tank on a toggle through a relay for 12V... After two nonfunctional Mechanicals... Just bypassed and left it. I'll just carry a spare...

Thanks to Reuben at damage control for the cell cradle box I made the plate and adapted a RAM riser.

Same Truck from Deadpool 2 in a Netflix Series for kids called"Pup Academy" these are the heavies, "Animal Control"

One word of warning on Electric pumps they PUSH better than they PULL, so closer to the tank is better... Easier on the pump. Just makin count.

My "NEW" to me 24 Bolt Tandem "B" Grade Wheels arrived today delivered in the heavy rain storm. the boxes fell apart... Thanks to FELTZ.. they don't looks terrible for "B" grade...

In American Sniper even has the EOD Rhino... And Smoke projectors.

Sicario 2 Day of the Soldado the Die Hard Blue Steel BULLET PROOF not even cratering the windshield HMMWVs...