Search results

Dear John

Sand Castle had a lot of HMMWVs And a Helmet Top "Ambulance"

The 3L80 is simply the "Heavy Truck" variant of the TH400.... because a parking Pawl was thought to be too weak to hold a truck...

Universal Filter Drier 2.5 X 7.5 in 3/8MIOX3/8MIO W/ 1/4 CP | Coldmaster DRYER AC RED DOT - 420415 – Fleetsource Leasing

Red Dot or Coldmaster... it is not that different from anything else.

Look in the A2 Manual... that is typically the PS setup for the A2 trucks R1s are kind of mixmasters.

Probably air in the system... follow the procedure to bleed and purge air. Lot of hoses and such going on in that system with some trapped air.

Dryer should be near the condensers I think...

Battery Box, it goes through the hole in the tunnel then in behind the Shunt there is a pass through. then Connect to the positive Buss and the Shunt Black to shunt Red to Positive Buss. the brown will need to go to the BACK battery positive terminal, and the 14V cable needs to be from the...

Possibly some dri slide or something, but I can see preventing the talcum powder desert dust from sticking.

No HMMWV in this but final flight 11 ship Chinooks USAR Aviation Standdown https://youtube.com/shorts/fGNzBhSCfRo?feature=share

Out shooting with friends Guess I should flesh out the pic a bit. from left to right. Mp5kPDW with Rugged Obsidian 45 Suppressor 9mm of course. AR9 9mm Pistol Caliber Carbine with 3 Lug adapter for suppressors... Mp5-A3 9mm with Collapsible A3 Stock. AR Derivative with 1-4x Trijicon Optic...

Fun shoot with friends

The Correct answer is ,,,, Maybe. you would likely want to wash the old grease out and put new in and if it is a sealed bearing that comes with complications like the seals.

Heck the wallered out alternator pulley on my 200A sounded like a knock, I knew it wasn't but it sure banged around.

Might run a compresson test on it too. can reveal a lot. sometimes stuck valves or bent pushrods... can result in odd noises that sound like a knock.

A Little While back I added A/C to my 1097R1 Red Dot Evaporator, Sanden 508 Compressor with 24VDC Clutch, BlackDog Customs Compressor Bracket, Red Dot 5 groove water pump pulley. bunch of hose and fittings and a parallel flow condenser from Coldmaster, and a simple wiring harness. works quite...

They Finally published the photos from the car show at LCAAP, WE are not allowed to take pics... but certain people can then they have to be approved for release... Anyway here is the photo of my 1097R1 from the show day First Place... this was in May...

Creamy or gray oil?

I'd do a compression check and or Leakage check on that cylinder and see if the adjacent cylinder has the same issue. Hope it didn't hydraulic lock...