• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. doghead

    How to tell if drums are worn out?

    Sure enough, Found that in the -34.
  2. doghead

    How to tell if drums are worn out?

    The specs are probably in a TM.
  3. doghead

    Doghead mod can I use this part

    Need more info.
  4. doghead

    CUCV Electric

    Actually, I did receive some mail from John recently. We''ll see what comes.
  5. doghead

    C847/U

    I'm sorry to say, Boatcarpenter is no longer with us to reply.
  6. doghead

    What would a M1028 RPM's be with 410 gears and stock tire?I

    70 in an M1009 is all I would ever consider. I doubt you were ever at 100 mph.
  7. doghead

    What would a M1028 RPM's be with 410 gears and stock tire?I

    http://www.crawlpedia.com/rpm_gear_calculator.htm
  8. doghead

    What would a M1028 RPM's be with 410 gears and stock tire?I

    I have driven my M1008 for thousands of miles(20 hours straight, with fuel stops), with 2900 rpm as a maximum.
  9. doghead

    What would a M1028 RPM's be with 410 gears and stock tire?I

    I mean, for over a few minutes.
  10. doghead

    What would a M1028 RPM's be with 410 gears and stock tire?I

    I quoted your statement(highlighted in black background) and disagreed with your statement. I personally would recommend you keep it under 3000 rpm for any length of time.
  11. doghead

    What would a M1028 RPM's be with 410 gears and stock tire?I

    They must sell motors, that's too high for long periods. Drive your M1009 if you want to exceed 60 mph.
  12. doghead

    M1028 Duallie Generator # 2's Exciter wire trouble light is not lighting

    One of our site's rules is to NOT post the same thing in multiple threads. It wastes peoples time and is rude.
  13. doghead

    Throttle Stop Shaft O-ring Size

    http://www.nsnlocator.com/rfq/5331-00-292-1464.html
  14. doghead

    Throttle Stop Shaft O-ring Size

    Whoops, I read post #6 and went back to the TM, in search of the info and after posting again, I realized you had posted an update. That's what I get for posting before reading all the posts... Hehehehe...
  15. doghead

    Throttle Stop Shaft O-ring Size

    Look at figure B-2, item 11. Is that it? If so, that's 2910-292-1464.
  16. doghead

    Throttle Stop Shaft O-ring Size

    When you posted "throttle stop shaft", I was guessing the "throttle arm shaft", not the shut off shaft. The part number I posted is for the throttle arm shaft. The number cross referencing is near the back of the tm(just before the index).
  17. doghead

    Deuce was dead on side of the road.

    What's a "mini convoy"? Is that like a "mini van"? Hehehehe...
  18. doghead

    Throttle Stop Shaft O-ring Size

    Also in the tm, is the Ambac part number, GA76195. I would confirm these numbers and call Ambac (American Bosch).
  19. doghead

    Throttle Stop Shaft O-ring Size

    I think I found the fsn for it in TM 9-2910-226-34. 5330-310-6659 Looking for more info...
  20. doghead

    torque specs for 465a1

    They are in TM 9-2320-361-34.
114,254members
167,163threads
2,353,477posts
5,826online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks