Search results

Can you get the nsn for the oring from the kit?

That is what I have been getting as well. I have just accepted the problem exists and I refresh my page before posting or editing.

I have had the same issue since the last big site update. http://www.steelsoldiers.com/showthread.php?101800-Canned-replies&highlight=update post#6

FWIW, from our rules.

I'm waiting for the next new thread to cover this because, this thread is way too long to read through.

Pull a cable off your battery and watch the alternator burn out. That would be no load, and it will fail. I've seen this more than once(after rebuilding the alternator with a new regulator), not my truck. The same issue occurs when an old dead battery has an open cell, and the truck gets...

I don't recall the thread and I did not find one.

5 ton trucks do not have electric winches.

2 busses. Find a local church and make a donation for use of their busses.

The alternators were not bad to begin with. The regulators fail.

The alternators go to full output and burn out. This has been seen many many times, with dead batteries. Same thing can happen with a bad(loose) battery connection. Read the years of experiences posted and you too will believe this.

They are controlled by the voltage regulator(internal part of the alternator). Have you rebuilt your alternators ever?

It's simply a capacitor.(filter) As installed, it's a load(same as a lightbulb), and must have one side connected to ground to function.

You do not need it, leave it off(do not replace it with anything). A suppressor is an electronic noise controlling device used when you have sensitive electronic communications equipment(on or near the vehicle).

Scrap price, minus the tire weight.

Was this the thread? http://www.steelsoldiers.com/showthread.php?49858-46-quot-Tires-Performance&highlight=rim+comparison I did an advanced search in the Deuce and Deuce mod forums for "rim comparison". The title looked likely to have your picture so I quickly scrolled through it and found...

Treat? I informed him. (made a simple statement) Do you know if he knows about the TMs(and how to use them)? I don't. And I would be glad to explain how to use them(and where they are), should he ask.

A look at the parts TM probably could have answered your question.

The advice about scrap price was good advice(all things considered).

I think we've covered this enough to make a reasonable conclusion.