Search results

Pic credit to @RGS20inophir

HEMTT rims and 16.00s will clear with no problem.

KS 66933

Expello valve.

Pressure protection valve opens the secondary side at 70 psi and supplies air to the wipers and horn and governor. At 120psi the expello valve sneezes. If the PPV fails, the sneeze never happens and you get pressure to 150psi at which point the pressure relief valve opens. What i think...

I've got one listed in the classifieds

The M818 speedo is calibrated for 11.00's. It'll read much lower than the 939A2.

>65mph

If you want to play with gensets, and to also have a source of power when the electricity goes out, get a MEP802. You'll probably get additional gensets as well. It's as bad of a disease as the green trucks... If you want seamless power with no fiddling and no thinking about it, a propane...

You're paying a lot of premium for the ability to comfortably cruise at hwy speeds for something that's primarily for "tooling around the lake and two track". JMHO.

The two rectangular holes in the pipe on your bumper could be filled with a 1/2" steel flat plate to provide mounting surface for 5ton type tow bar attachment points. That's how I'd do it if I were using your bumper. Here's a pic of the redtruck's rear bumper, made to be compatible with...

I made these for my RH bumper -

You should have two recessed flat plates on your RH bumper. Fab a bracket for your towbar to grab and bolt it here. I've got a couple I fabbed. I'll post pics when I get home this evening

I've done this quite a bit. I used a medium adjustable towbar and tow the pickup behind the 5ton.