Search results

Just a smidge over 20% iirc. I haven't taken the deuce on any road trips since I drove it from NM to KS.

I'm thinking 9.00's are 38". And this number provides calculations/predictions that are more in line with my comparison of GPS speedo with M35A2 speedo with 395's.

Value fixed is $600 or so. Use that to calculate if repair is worthwhile. I'd say "absolutely"

I've done it. The answer - "very little"

Paid memberships don't see it. That's why mogman and osteo aren't seeing seeing it.

We have "pay it forward" in the classifieds for exactly this purpose.

I wouldn't take $15k for my M998.

I have literally driven a $1400 auction truck from the auction in KS to our place in AZ, with a second truck on towbars behind it. "The good old days" , when you could frequently find trucks at near the scrap value of the steel. Those days are long gone.

So, I know absolutely nothing about 3d printing. I'd like to make stuff. I have downloaded some print files of some stuff I'd like to make. What do I need besides filament, and what's pictured below?

Multiple variables are involved. With cancers its rarely just one thing. Mesothelioma being the exception.

I bought mine with no problems from Sherwin Williams industrial coating division. Specifically in OKC.

Thanks. Somehow I missed that. My understanding is hemtt and mk48 were deliberately incompatible to avoid using hemtt tires on the mk48 as the sidewalls of the 16.00R20s weren't up to the sideways loading inflicted by the mk48.

I'm confused. What vehicle do you want to use these on? HEMTT rims work just fine on a 939series or 809series 5ton.

To what purpose?

Also none. Lube the cable.

GVW = What it weighs GVWR = What it can weigh, fully loaded.

GVWR is > 19,500 https://man.fas.org/dod-101/sys/land/m1078.htm

The A3s have that CAT engine. Funny you should mention learning to drive a manual transmission using an M35. That's exactly the vehicle I learned on some decades ago.

This is a late airforce truck with the dual circuit brakes. I'll send you a PM with more details...

Go to a different DMV office.