• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. doghead

    5 ton axle bearings and seals part# x-reference?

    There is no such thing as a civilian equivalent to the seals.
  2. doghead

    Cherry boms how load are they?

    You get 15 threads with the words"cherry bomb" in the CUCV forum, if you do an advanced search for "cherry bomb". I didn't read them all, but I bet you can find your answer in one of them. You new guys NEED TO USE THE SEARCH FUNCTION before posting. That is what we(Mods and Admin) want and...
  3. doghead

    Fuel Dilution... 9% !!!!

    Your boost pump may be leaking fuel into the oil. Pull it out and turn on the in tank pump and watch for leakage around the shaft.
  4. doghead

    engine goes full throttle on startup.

    Did you post your problem before?
  5. doghead

    Is there a SS member near Laramie Wyoming....?

    Steve Justice 810-223-3616, Michigan.
  6. doghead

    Hyd.Head Replacement

    From the TM, for the fuel lines at the HH. Tighten nuts (15) 23-25 lb-ft (31-34 N.m) and lower dust caps (16) over nuts (15).
  7. doghead

    Rip in top

    Pliobond and some patch material
  8. doghead

    Slow vehicle safety

    Driving with your service drive lights on. (daytime) Rewiring your front park lamps to be on with the headlights on, is also a good idea. Defensive driving.
  9. doghead

    Are the M818 12volts or 24volts?

    Actually, there is one 12v circuit on an M818(the intake heater).
  10. doghead

    Warner Robins, GA

    M35A3 weighs about 14000lbs
  11. doghead

    Another Thanks to The Gimp

    Or, is Steve starting to look like Gimpy? :?
  12. doghead

    New girl...

    As am I...
  13. doghead

    Is that temp rise normal

    Earlier you posted this in another thread. Now you started a thread on it here. We call that cross-posting, and it is against the rules(for several good reasons). • Cross-post multiple posts or threads about the same topic. This includes either creating multiple threads about the same topic...
  14. doghead

    Can't get to resources section

    Your link requires membership. Linking: Please consider the following regarding linking: • Do not link to password protected websites that the rest of the membership cannot access.
  15. doghead

    Another Thanks to The Gimp

    Got GRAMILF?
  16. doghead

    Looking for manual for 89' Refurb m35a2c

    You need TM9-2320-209-14P
  17. doghead

    Why the Deuce Doesn't Have These I'll Never Know!

    Move along folks, move along, nothing to see here....
  18. doghead

    a bridge too weak

    I admire your talent. Must ask, any trout in that stream? (I love fishing)
  19. doghead

    Is the slow blow fuel pump fuse 1 1/4"?

    Since I posted here last, I thought about that very idea and did it. It took a few minutes but it worked! I looked in the -20P, looked at the pictures until I saw the fuse! then googled the part number. Found it in about the 3rd link I looked at, including the length of the fuse. I guess it's...
  20. doghead

    New Section Idea??

    Keep an eye to the sky... watch for the pigs to fly... PB, tell us the story again, how you bought that shiny red car from that poor old widow for next to nothing....
Top