Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
So I have been looking for a way to mount the pyro in my M109 for a while. I have seen a lot of custom enclosures and some of them are really nice but I wanted something different. So, I started looking around for military items that were similar size to the gauge. Enter the M83 Smoke grenade...
I have a Southwind 978m 20k btu heater that needs the soft parts in the fuel regulator. Does anyone know a source for the large diaphragm in the regulator? Any help would be much appreciated!!
This is the heater thats in the M109 shop trucks and lots of the shelters....
I started using my H140 and I have noticed that it cycles often. It fires right up and then stays lit for about 3 mins, then shuts down for 1 min. Rinse and repeat. Ducts on or off makes no difference. It's not a flame out, no red light. It just shuts off fuel. My guess is the max outlet temp is...
My 002 seems to work really well. However, when i run it with no load, i can lock in at 60hz and it stays rock solid. When I add a load, the rpm drops a bit and the Hz drops as well. So, i crank the throttle and bring it up to 60. Then i unplug the load and the hz goes way up as the rpm...
This is my first dodge MV so please excuse me if I am missing something obvious. The story on this truck was that it was driven to the field 6 years ago. So, the story is it should run. I drained the bad gas, flushed the lines wih fresh gas and put a few gallons in the tank. When the starter...