Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hey guys,
bought this TC togehter with a th400.
The owner said, that this combo is from a K5.
It has a 32 spline input shaft and has exact the same lenght like my NP208.
It has an electric speed sensor.
Unfortunately the tag on the TC is not there.
At the beginning, I thought its a NP241, but...
Hey guys,
I bought a GM 10.5 14bff with a detroit locker in it and 4.56 gears, which was in a M1008, for my M1009.
Disassambled it and saw rust on one of the teeth :(
I want to rebuiuld it, so it doesnt make sense, to run it with rusted gears, so I need to order new gear set (want to stay...
M1009: 4" lift - draglink geometry correction- dropped pitman / raised steering arm?
Good morning together,
my M1009 has a 4" leaf springs in the front without any steering components corrections done.
I have installed a dropped pitman (should give theoretically 2" of drop) arm yesterday, to...
Hi folks,
I have removed this days the tailhousing from my NP208 to change the rear output shaft seal and bushing.
I have ordered TIMKEN 5208 from rock*uto, but it is so, that the bushing is just too smal, it falls thru the hole :-(
Bushing, what I got has 48mm inner diameter and 50,75mm...
Hey guys,
my NP208 is here on my table and I would like to change the rear output seal and bushing ( TIMKEN 5208 ).
Seal was leaking and the bushing seems to have wear marks.
Outputshaft has no radial or axial play.
Anyway, removed the 4 bolts, which hold the tail housing, but can't get it...
Hey guys,
my name is Eduard, 41, from Germany, a big fan of the US CUCV's and restore my M1009 since almost 3 years and try to manage the rest of the time with my kids and wife 8)
Here since 2012 as a 'silent reader', love this forum and now wanted just to introduce me :mrgreen:
Thank you and...
Hey guys,
I have the following situation with the glow plug system:
In my garage it is around plus 10 celsius degree.
1) switch on the ignition
2) PNK/BLK-39B delivers 12V on the glow plug relay, wait light is on, but LT BLU-505 doesn't deliver ground to the glow plug relay. This leads into a...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!