Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
OK sooo i fix it! turn outs there was a crack in the line right near the gas tank ever so small causing the pump to only suck air...instead of trying to find a line to replace it. I just found a longer rubber fuel line and routed it to the fuel sending unit.
The only problem now is i...
Ok so update
1. I discconected the rubber in line to the fuel pump and put some gas in a separate container and put the hose into it. When cranking the engine i got fuel pressure and it started right up.
So that mean the fuel pump is ok and the cam is driving the pump arm just fine.
2. I...
Sooo this might be a long post but bare with me.
I have a 1977 m880. Iam currently rebuilding the engine(just getting parts together) with my cam with lifters, intake manifold, timing chain and gears and 4 barrel carb. But first i decided to drop the gas tank and clean it out.
All went well...
ok so got the alternator wired up and the rod in plus a new NSS and harness,and it cranks up everytime..
But sigh now i have a new problem. The alternator is a Powermaster 17509 - Powermaster Street Alternators - Overview - SummitRacing.com and i have it hooked up with a high output wiring...
ok so here is the extension that came with the kit...3inches as you said it should be.
here is the shift linkage.
not sure if you can tell what gear its in but i know its not in park like it says it is...
tommorow ill try to cut and weld in the extension as close to the steering column as...
ahh ok thanks alot. The kit did come with an extension but i thought that was for the floor shifter. either way i work in a shop and i can find a 3inch rod to extend the linkage. Doesn't it matter where on the rod i cut and weld or anywhere will do?
Also i meant starter relay sorry ill try to...
Ok so i have a 1977 auto trans m880. The truck used to crank all the time(had problems firing cause of the carburetor but already got a new one on the way). I can previously lift the truck bed about a week ago and decided to lift the cab yesterday.
Got all the blocks in place but not without...