Search results

All A3's are the same, I have (2) trucks and both have identical pedal pressure.;

I have (2) M35A3's (1) is a 1996 A3C and the other is a 1998 A3. I would live for some poeple to get together and compare notes.:beer:

The tach is electric with a magnetic pick-up, there is no cable! The truck will run 50mph at around 2900 rpm. I have (2) A3's and both are the same. If the pick up is bad they are avalible for around 250.00. If you need help PM me and i will give you my number.:)

Anybody have a steering wheel for an A3. I just picked up a new A3 from Ft Campbell, TN and the wheel is cracked all around and would like to install a good one.

I have won an M35a3 from Fort Campbell, TN and need to get it to Farmingdale, NJ. Anyone have any body that can help with transportation?

That is the CTIS compressor, the pump has a bleed off valve on the bottom. Shut off the CTIS system and see if the truck makes air. The compressor is on the driver side of the 3116 cat. Call me if you have any questions. 732-558-0990

Year: Check the tag on the dash for the contact year, close approximate. Make: Kaiser-Jeep (Says on dash) Model: M109A3 (That one was easy!) VIN#: This is stamped on the Kaiser-Jeep metal plate, check there Body Style: Truck Color: Green Weight: 15500 GVWR: 23000 :grd:

So if i have a green engine it does not mean it was a replacement :?:

Not sure why but i have not had a bad time, i have listed below my (2) experiences: EUC Status history: StatusDateSubmission of EUC Pending09/10/2009 EUC revisions needed09/17/2009 EUC sent to Battle Creek09/25/2009 Approved11/05/2009 Customer Notified11/05/2009 EUC Status history...

I have just replaced my tach sensor because i think the old one got wet and stopped working. Does any know if the sensor needs to be calibrated and if so how? The tach is now reading max rpm at around 2900rpm, i recall the old one being about 2650rpm. What is max govern engine speed for a...

ROBO IMPACT THE CATOLOG # IS 2011. MANUFACTURED BY AIRCRAFT DYNAMICS, LIMA OHIO. MADE IN USA THE NSN IS 5130-01-370-2264 Call them and they can help you with parts.

It is absolutely 15w-40 or equal!;-)

Call me i am interested, 732-558-0990 Rich

Ken, Everyone says unhook he CTIS, I disagree, it is probalby something easy. I had the same message and found that the epoxy was cracked in the rear spindle and i reglued it and it was fine. My pedal is the same just get use to it. If you have any other questions call me 732-558-0990

I have an M35A3C and mine does the samething. I was told that it is a tire balance problem. I installed extra lug nuts opposite the CTIS shields and that fixed my problem. :idea: Try about 5-7 lug nuts. :wink:

OK, but why buy new from the vendor when we have NOS for the military with all hardware and straps ready to go for much less.:idea:

I have instock new bed covers in 3 color camo with the new style bows, new in the military create. I also have the matching 3 color camo cab tops. :-P Call me if you are interested. 732-558-0990 rich:!:

Yes it is thank you very much. Who in manasquan has one?

Andy, Thank You great pic!:wink:

If my CTIS is working i was worried about the equal powder. I run that in my Peterbilt with 22.5 rubber and works get, but if my CTIS purges the air i was not sure if the powder would damage the CTIS unit.