Search results

We are looking to transport one 3 x 3 crate weighing about 400 pounds from Janesville WI 53547 and bring it as close as possible to North Carolina, 27312. Can anyone help? Many thanks, Kevin and Nancy

Guys, can somebody help me please? Having had experience, is there a method of transferring the stud fasteners on the door latch of the front panel across to a replacement new panel? Re: TS6115-585-24P/5 (3 in total) Stock number for this fastener/door latch is 5325-00-599-8854 69-694-8...

Guys, I know this subject has been beaten to death--but I have a unit with 42 hours on the meter that was running perfectly in an emergency situation running the pumps for the entire water system for a private school. It ran about 3 hours then shut down abruptly. First check--oil was honey...

Power went out, so started up the MEP-003 and it ran beautifully for about 20 minutes, then utterly failed. No readings on any of the gauges, nothing. We don't have access to the manuals at the moment, so any suggestions will be most gratefully appreciated.

Hello all, Although we didn't get the snow here that they did farther northeast, it's still in the 30-40's and we need to keep the house toasty warm. We thought you all would like to see our trailers at work as shelters for split wood. We protect the interiors with plywood, and in the summer...

Hello, all, a friend shared this file of really great photos; I'm not sure it will post because it is a PDF with a number of shots, but I wanted to try--here's hoping it comes through, because these are spectacular!

Hello all, thought you might be interested in seeing this test stand. We have used it for many years and it works great. When rebuilding a mule engine, or checking a used engine before installing, we attach or bolt the motor to the front of the vertical bracket facing the pull handle. As per...

Hey guys, thought you might enjoy this pic of part of our stable, two of which are working just about every day. The hardest worker of the bunch is the one at the front, with a plastic seat mounted to plywood. The plywood protects the deck, has a cutout for accessing the engine hatch, and the...

Hey guys, may sound silly in the middle of a heat wave, but winter is not far away. Thought you all may be interested in a design for a heated and conditioned enclosure for our beloved generators. The pics are better than a thousand words, but basically there is four 6 x 6 treated posts, one...

Hello all, rather than re-invent the wheel, I was hoping to get advice from someone with a ground mounted MEP 003 that had built a utility bldg./enclosure that would keep the generator protected but still allow access for service. Also, does passive exhaust from the building work best or the...

Gentlemen, after 2 years finally got the generator connected to the house. Started her up, the sparky checked the voltage with his amp meters and we have 120 and 240 V showing perfect. Turned off main and all breakers at the house, threw transfer switch over, checked voltage incoming, still...