Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Even if you are not interested in buying mine, you are welcome to come to check it out and I can walk you through my truck and some issues to look for.
I have not posted it for sale in the calssifides as I have to touch up the paint.
PM me if you are interested. I can send pics and/or talk...
I tried those part numbers and when I tried them on my doors they were too short. LMC clearly lists those part numbers as for a 79-81 and they do not list a part number for anything after 81.
I returned them to LMC and am still looking for a replacement from other sources.
What am I missing...
Went on an unscheduled mudding jaunt the other day. In cleaning up after my behr tan paint job showed its weaknesses. Result being that there are touchups necessary all over the truck. Maybe whole sections re-painted.
Any recommendations for behr repair tips? Seems the behr didn't bond to the...
So after all of your suggestions here is the latest:
I have replaced every switch (headlight, turn signal, dimmer, ignition), I have replaced all bulbs three times, I have replaced all fuses three times.
I have traced all of the wires at the rear end of the vehicle.
I ran a jumper from the...
Yes I have turn signals, front and rear. Markers front and rear. Reverse lights. Headlights. All lights except the brake/stop lights.
I have voltage at the brake switch in and out.
I am lost reading the wiring diagrams and tracing the wires into and out of the fuse box.
CPTD
I have been searching for a solution to my brake light problem, though others seem to have similar issues, I haven't found a solution to my problem. I have however tried as many things as I could from other folks suggestions on other threads.
I have no brake lights, period.
I have checked...
I have been searching for a solution to my brake light problem, and though this is an old thread, this seems to be the best place to start.
I have no brake lights, period.
I have checked continuity on the brake light switch, it is good. I have checked for power on both sides at the rear of...
Replaced left front hub, bearings, seals, spindle, spindle nut and both lockers. Repacked right front wheel bearings and seal. Replaced front brake pads.
I'll check the stuff you guys suggested and report back.
CPTD
I have an M1009 with 16" rims and some nice coopers on the wheels.
I have 2 questions:
1. When at right lock I am getting some rubbing from the drivers side tire on a steering component, I think it is the pitman arm. I do not know what the offset is on the wheels and would like to...
Thanks for the responses on the paint codes. I think I have that problem solved.
Next question to be answered is.... Do I need to prime anything that isn't taken to bare steel? One of you wise fellas said that the acrylic paint should stick well to the flat CARC like paint very well. should I...
I have a M1009 that my wife wants me to paint. "I don't want it to look like you stole it from the motor-pool" was the exact quote. I want it to still look military, cuz frankly that is why we buy these things (or at least I did).
So, I want to paint it tan, check my avatar and you will see...
So I started the weekend with a new alternator enroute. Recieved it and it was absolutley the wrong piece. Went back to Autozone and they had the right one, or so we thought. Installed it and had an extra wire hanging off the truck that was supposed to go into the alternator.
That is the...
I know that this has been discussed many times before. I have read **** near every post on starting and the possible fixes.
It all started with the clicking. Wouldn't start at all. The starter would begin to turn but was going very slowly.
Did the Doghead. Now NOTHING.
I took the glow...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!