Search results

hello! We are replacing engine belts on our m1097r1 equipped with the 3 belt 200amp generator. This is a 6.5 diesel with 3spd model. From what we can tell the 3 belts are the same but the one for the power steering is smaller. Any help on cross referencing the 3 larger belts and 1 smaller...

Hello- looking for a starter switch for a 2002 mtvr. Does any one know the part number or source? I looked up the numbers on the switch (pics attached- or hopefully attached...) and came up with nothing. Any help would be appreciated. Regards Andy

Hello- looking for a starter switch for a 2002 mtvr. Does any one know the part number or source? I looked up the numbers on the switch (pics attached- or hopefully attached...) and came up with nothing. Any help would be appreciated. Regards Andy

We are in the process of bobbing an M35a2 for a good friend. He wants to mount 1400x20 Good Years on the stock M35 wheels. Will these tires work with the front end with steering, hitting, etc? I've mounted 395's on M35's with no issues but not sure about the 1400x20 setup. It's going to be...

I need a transmission temp sending unit for the M35a3 Allison and cannot find one. It's located on the passenger side of the Transmission. It's a 2 prong unit. I bought one from CSI but they sent a one prong. Does anyone know who has this parts or know the part number? Any help would...

Hello, We have a customer who purchased an M931a2 from us that is using the unit to pull large concrete pipe on a large construction project in Iowa. He was pulled over by commercial vehicle enforcement today and was told he couldn't use the vehicle because the truck did not have a sticker...

Hello, Does anyone here know where to source the part or have a part number for the 3 way diff locker switch on the dash on an M920/M916? Anyone have good leads on who bought some of the partially parted out M916/M920's in TX a year or so ago? Ph# Contacts? Also does anyone have a copy...

I have the M939 tech manuals coming and will be posting them to our site soon. In the meantime what do these trucks have for trans fluid in the Allison 654's from the military? 10wt? Do any of you M939 owners here change yours over to Dexron? Thanks, Andy

With some help from friends we took some of the 6x6's out for the Memorial Day parade in Owatonna, MN. We had a good turn out this year even though it looked like it was going to rain during the parade. I found that if I used the M920's air horn on the crowd they thought the worst was over until...

Over the weekend the Big Iron Classic Truck Show was in a neighboring town of Kasson, MN. I heard there were around 400-500 trucks on the ground on display. Lots of classic W900 A models, 12v71's, 3408's, KT Cummins, etc. If you aren't a fan of spark plug engines this is the place to be...

We are having our M920 towed off site tomorrow due to only one loadout a month in Topeka. Needless to say it's hard to line up an RGN with timeframes like that. The towing company is planning on towing the truck back to their lot approx 10-15 miles. I'm new to the M920's. The tow truck...

We are picking up one M818 tractor out of Richmond, VA next Weds. Does anyone know a good wrecker service in that area? Michael the GL rep (who wasn't that helpful!) said the loading ramp is approx 1 mile from where the truck is located so I just plan on having a wrecker lift one end of the...

I have an M35a3 with central air inflation that is leaking. (suprise!) What is the recommended way of unhooking this system so the tires do not deflate. Thanks, Andy

We are picking up an M35a3 tomorrow (I know, I know I make fun of them but had to try one for the prices they have been bringing) Assuming that a few of the tires will be flat and the possiblity that the central air inflation doesn't work how do you manually inflate the tires? Do they have...

I recently purchased a 5KW Industrial Acquistics Model MEP-002AAS 5KW 60HZ diesel engine gen set off GL to have as backup power. I'm not familiar with these at all does anyone know what make/model diesel engine is in these for power? Do these have their own batteries for starting? Do they...

This morning I had an M816 on a stepdeck drive by my office. What a way to start your day! I then received a call from our scheduler who said "there's some 6x6 wrecker out in the lot getting loaded is that yours". I went out and talked to the truck driver who said the truck was out of Little...

I recently won 12 of the 2 piece Hemmt rims in the last Columbus, OH sale. It looks like the rims are strapped to a single pallet. What would be the best avenue to ship these to Minnesota? Any trucking companies in particular recommended? If somebody in Ohio wants a set of 6 Hemmt rims...

Can someone please help determine what year this XM818 is? Vin# C124-12978 Thanks, Andy

By chance are any of you going to be at the Redstone, AL location today or tomorrow? I need to get vin's from two trucks I purchased at this location and am having a difficult time getting the GL rep to help out. Please PM me or call me on my cell phone 507-250-5288 if you can be of...

We have an M35 that currently has a small leak on the oil line that feeds the turbo bearing. The line going to the fitting on top of the turbo is dry but the connection to the engine block is leaking. I've never replaced one of these before- is this just an o ring that seals these...