Search results

I'm in! Out.

I'm in. Thanks!

Does anyone have a .pdf copy of the TM for a HDT GSQ396ZABNWFX11 E2CU, NSN: 4120-01-597-5423? ID Plate calls out 568-00020-09 as the manual. I think this is an HDT manual. Thanks.

Yes! Thanks for responding. How can you help?

Initial startup after units sit for a while will "trip" the breaker. Reset and try again (Power-Up). Turns out, all you have to do is replace an Oxygen sensor for the analyzer (digital readout) and some filters (HEPA) and the POGS-10 units will produce "O₂" for up to two years. Up to 5 LPM (2...

Did you ever get the POGS-10 running?

Does anyone know if you can synchronize a MEP-803A (10 kW) and a MEP-802A (5 kW) for a total of 15 kW? The synchronizing unit says it it is designed for both units. Do the units have to have the same kW rating to be able to synchronize? My thinking is use the MEP-802A for low demand and the...

Does anyone know where I can find the software / CDs for the diagnostics on the HMMWV? My MSD V2 hard drive went south (age)? Thanks.

My Miltpe V2 Hard drive just went south. Does anyone have a copy of the CDs needed to reload the Dignostic software for the MSD? I can reformat the drive, just need the software and IETMs for HMMWV and M35A3. Thanks.

According to the VIC-3 TM 11-5830-263-20&P the PALADIN (Remote) calls for a 25 FT "Highway Cable" to a FFCS to get the job done (No Telephone). Augi, can you post pics of your FFCS/T (Front and Sides) for a better look at the connectors?

The ITS/R only has two headset connectors and two binding posts for the wire link with the RAFT. The FFCS/T looks like it connects to the ITS/R via the "Port" side headset connector of the ITS/R. The FFCS/T also has what appears to be a "Call Lamp" centrally located (top/face). No power...

I have 2 Cobham RAFT and 1 ITS/R (see pics). According to a Cobham Application Guide, the system needs a FFCS/T plugged into the loop in order to use the RAFT (Remote). Does anyone know where I can purchase a FFCS/T? Telephone/Lamp for the ITS/R? ROVIS VIC-3 Tech Manual?

Here are the spec sheets for the gen set and ECU.

Looking at an MEP-802A tactical generator to run an 18000 BTU ECU. Does the 3 Phase hook-up enable me to do this? I have done calculations on amps used by the ECU (10.2) all of the info I can find on the web seems to be for gas generators for RVs. Also have a DRASH Power Distribution Box with...

Has anyone seen or heard anything about newly passed legislation in Virginia enabling HOAs to prohibit storage of Military vehicles on homeowner's property? My HOA has been stewing about my vehicles for years. I just received an official notice yesterday. Covenants excerpt: Section 6. (d)...

I have a M1102 trailer that surges as you tow it. Could this be due to a weak shock/spring at the surge brake assembly?

Try ebay.

Had to pull the turbo to change the oil cooler core on my M35A3. I am looking for the gasket that goes between the turbo and the exaust pipe (#25). 23 PAOZZ 5330013740400 19207 12256082-1 NON-ASBESTOS GASKET Does anyone know where I can find one or two of these? Alternate part numbers...

Mike, Did you get a chance to see MitchG? Does he have a set of racks left for sale? Thanks.

Replacing the shutterstat on my M35A3 required draining the coolant. When I drained the coolant it appeared dirty. When I poured the coolant into 1 gallon jugs from the 5 gallon pail I drained the coolant into, I noticed residual oil on the bottom of the 5 gallon pail. I searched the SS...