• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. V

    Miss on startup, Miss under load, white smoke, stuck injector? They test fine. Odd.

    Short story: multifuel starts with a miss, smokes white, a slight miss can be heard under load, low on power, runs hotter than normal. You would think a stuck injector but all Injectors pop test fine. Odd. Any ideas? Long story: The Hydraulic Head cracked 100 miles from home. I leaked 50...
  2. V

    2.5 ton 5 ton PTO compatibility

    Can a 5 ton cummings PTO be used on a 2.5 ton multifuel? Can a 5 ton multifuel PTO be used on a 2.5 ton multifuel?
  3. V

    gun ring cab damage

    I have been researching the m66 and m49 gun rings. Some say, the that with the proper cab reinforcement plates damage will still occur. This is due to the length of the legs creating to much torque, the weight of the ring, or the recoil from a .50 BMG. The m49 is lighter. Less weight would cause...
  4. V

    Freedom Run 5K (8-8-2013) East Moline, Illinois.

    Looking for as many military vehicles as possible to attend a military themed run/walk event. Proceeds to benefit the USO. I was told there was free beer and food for anyone bringing a vehicle. :beer: Woot! http://www.freedomrun5k.org/
  5. V

    wheel bolt hole counter sink?

    395/85R20's. I want to run the rear wheels dish out. Is it necessary to counter sink the bolt holes of the rim? or can I flip the nut around and have its flat side against the rim? What prevents the rim from rotating 1/4inch back and forth when the rears are duals, just friction? I would...
  6. V

    395/85R20 correct innner tube link.

    http://www.gemplers.com/product/182084/1000R20-Radial-Approved-Truck-Inner-Tube-TR78A-Valve#TAB-INFO Is this the correct inner tube for 395/85R20 tires?
  7. V

    Axle noise? video

    I have been trying to hunt down and fix an irritating whining noise. Found many treads on this. None have fixed the problem. The truck makes a whining grinding noise at 40mph or greater. First I thought it was the output shaft of the transmission. So I put all new ball bearings in the trans...
Top