Search results

had a crack in the old pump, and i replaced with a military depo rebuild pump. upon installation me and kenny checked the timing mark on the pump under the 4 bolt plate and the mark was 1/4 above the the timing pointer, but so was the old pump still on the motor with the timing mark on the 3rd...

after updatin to a turbo and jake brakes i really havnt used the truck, but hauling 50,000 gross i sure could feel a lag of power, the turbo is a holset ht3b, but the fuel pump doesnt pump fast enough, i only build 10 psi of boost, my pyro barely hit over 800*, but the jakes work the best, that...

I have a idea..... Couldnt you block the air lines going to the sprag, eliminate the sprag, and plumb new lines to the transfer case, with a air toggle simular to a duece, i was thinking this might work, knowing there is no electrical engagement just air. Some people say you would half to...

story of the truck.... regular XM818, 25B jake brakes, now installing ntc-420 turbo. the real issues are hood clearance, with the jakes installed the radiator cap, blow by tube, and front valve cover hits my hood already, but iam able to close it, now i have had a few designs of intakes to pick...

ok here goes the story, the truck has a straight 5" right off the manifold and barks like no other truck, so figured jakes would be insane, after digging around found some the models to look for are a 25A, 25B and a 425A, all are for the 855 block of this time period, n14 are different. also not...

ok i had my "nelson" muffler break at both flanges on a trip. got it back home and found some 5" couplers and a stack off a mack truck i have, and made some straght 5" right from the manifold. was pretty easy, took the flange from the muffler and welded a 4 1/2 to 5" coupler to it and ran...

just picked up a 1968 strick 35 ton manual detach. this trailer is 13000lbs and did i ever feel all that weight going up hills. i will fix all the rust, blast, prime and paint in army colors and i will be at iola in fall. it is 40 ft long, and a 22' well. so the duece will fit right on. i ran my...

afternoon to my fellow mv owners. took the semi down to the race track and while in line for tickets starting and stoping and clucthing all the time my brakes faded out to the point i had it to the floor and i was using my handbrake to stop from hiting the truck in front of me. whats going on...

ok the truck is a 818 cummins the truck when starting out 1st gear it seems like the brakes ar applied and there not and the parking brake is released. then goes away when moving and makes like a rumble noise when driving then goes away and when stoped at a light does the same thing again...