Search results

That is a possibility. However even the RLA comes out to 3,500 and as you can see it’s only using 2,671. I’m of the opinion (I’m not an electrician) that we are not seeing LRA loads on startup. If that was the case even an 803 would choke on that IMOP.

All that being said right our temps have been in the 100's with overnight lows around 80 deg. So I'm running these AC's significantly more than usual. During the day I maintain 78 deg upstairs and 74 down. Even with that, yesterday my upstairs unit ran over 6 hours straight just trying to...

As luck would have it last night my 3ton and 2ton unit started simultaneously! I could hear it when they lit off as the units are not too far from my master bedroom. Pic attached showing start load. Note, on all these screen shots the moment showing the wattage is on the far right hand "grey"...

Below I’ll attach some screenshots of my monitor showing my starting load and running load of my downstairs 3ton unit. As you can see there is a variation in the starting load. The last shot shows the running load for that unit.

I'm happy I came across this thread! I'm in Houston as well and have the same questions and concerns as Ham & Eggs. I keep going back and forth between a Honda EU7000 and either a MEP-802 or 803. I have home electrical monitoring as well, not as extensive as Ham & Eggs LOL but it keeps me...

Looking good! I have a question that I can’t seem to find an answer to online. How wide is the unit with the side doors open? Or how wide is the side door(s) by itself? I’m trying to calculate slab and clearance dimms.

How did the pickup in GA go? Pretty simple process? I was watching that auction as well, congratulations on the unit!

Request cancelled. Water has risen to over 6', boats are getting dispatched. Thank you for the messages gents.

Update: Water level estimated at 4 1/2'.

**Cancelled** West Houston high water rescue needed Gents, if anyone is available for a high water rescue in West Houston please contact Jeff @ 281-989-7137 he is a forum member here and his neighborhood is experiencing some major flooding. There is a family close by that needs assistance...

Is that the one at the Home Depot Parking lot? I might cruise by in the Pinzgauer....

Yellow Nylon? You sure it wasn't polypropylene ? It's going to take some serious rope to break that suction. I would also recommend going much slower to reduce the shock load.

Snatch straps are your friend. I've recovered some obscene "stucks" with my little Jeep and a 20K snatch.

That's exactly what I had in mind. Not sure if I'm going to be able to swing it though. If I did it would be Saturday afternoon.

Anybody going to be in Galveston Memorial Day weekend?

On that note if you are on the Gulf Coast and need some hose/fittings PM me. This is what I do for a living. We can and do ship all over the US for that matter.

JIC is a great thread, no Teflon or any thread dope required.

Nice!

Good lookin' haflinger's

That pic is chocked full of win.