• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. H

    The mythical CUCV 4L80E swap

    Awesome write up, I did most of my 4l80e swap off of this information. I have been having issues with the transfercase, prior to the swap I had no issues with it, popped it in after and not getting 4LO, it like neutral. Took off the linkage and manually shifted it, same thing. Any advice...
  2. H

    M1009 NP208 4LO issue

    Hello All, I was wondering if anyone had any input for the issue Im having with my M1009. I swapped in a 4L80E and mated it to the original NP208 that was rebuilt and working fine the last 3 years. I also swapped in tons with 4.10 gears on 35's. My truck used to just about crawl in 4LO up or...
  3. H

    Show us your Military Trailers

    purchased a m101a today and the guy threw in another trailer, he didn't know much about either...not really sure what the other trailer is as far as specs, and it's use in the military, it's rough but pretty cool...once done it'll mostly be pulled by my m1009...anyone have info on it? I searched...
  4. H

    Humming Noise and leak from T Case

    Richard - I will check bearing bushhawg- sound is present in both 2wd/4wd and yes there was a rubber seal
  5. H

    Humming Noise and leak from T Case

    Well this all started about 5 months ago, T case started leaking quite a bit from the front output shaft seal, so I changed it, no leak for about 3 months, then it started leaking a again, I let the truck sit for about a month till I had time to change it, Changed it again with a different seal...
  6. H

    3/4 ton axle conversion/ 1/2 Ton axle conversion

    I have an 86 m1009, I've been also thinking of getting a 70-72 C10 (2wd)....I know someone selling a 72 C20 4x4 with 3/4 4x4 axles, would it be feasible to convert the C20 3/4 ton axles to the m1009 and the 1/2 axles to the c20 and make it a 2x4? I know I could just find a 2x4 but the price and...
  7. H

    Grinding when going into 4H and 4L

    So my 86 m1009 is my first off road truck, Is it normal when shifting into 4H/4L there is always a little grinding sound? I stop the truck, put it into neutral then go into 4H or 4L, and if I am in 4L and I try to put it into park after its engaged it makes this awful grinding so I have to keep...
  8. H

    RV AC system on m1009?

    My buddy is upgrading the roof ac system he has on his conversion van and asked if I wanted the older unit for my m1009 since he knows how hot it can be when we hit the desert trails in late spring/early fall....anyways wondering if I could make this work? My m1009 is converted to 12V and I'm...
  9. H

    M1009 Alignment issues

    Will do, thanks for the info.
  10. H

    M1009 Alignment issues

    Took my blazer out in the san bernadino mountains for a weekend trip, day 2 coming off crab flats trail my drivers side front tire busted, no spare and we tried to patch it but the side wall gash was too large, patch held till we had to cross the stream, after that the tire was done...so 13...
  11. H

    M1009 trailer dimensions

    So ive read a whole bunch about different trailers the m1009 can, cant and can but shouldnt tow but I didnt find a whole lot on dimensions, i was wondering is there a trailer that the m1009 was made to pull that will fit a 8x5ft ranger RZR 570? (a little less than 1k LBS) If not, whats the...
  12. H

    m1009/m1008 bucket/ bench trade

    I have an 86 m1009 and would like to get a bench upfront to be able to seat 6, I'll post some pictures up soon the passenger side seat is in great condition but the driver side does have a rip, if anyone's interested please PM me I live in SoCal so I prefer not to ship if there's anyone local
  13. H

    Portable AC for m1009

    Alright so if I get a 3k watt inverter is it possible?
  14. H

    Portable AC for m1009

    I have been doing research on putting in an aftermarket or picking an AC from my local yard but, I was thinking of using my portable AC, haven't needed it since I moved, it already has a vent hose to run out of the truck (hose I used to run out of the house), I already have a 2300W converter I...
  15. H

    M1009 shifting rough, high RPM, doesn't want to go Into 3rd.

    I've only had this truck 2 weeks...Yes I've read the mounds of threads and posts on he th400 and adjusting the vaccum modulator and testing for leaks...so I pressure tested it and read 40 for a second or two then bounced down to 20 and then back up to 40, and kept doing this so I turned the...
  16. H

    New to the Forum...New M1009...stock...what to mod first.

    So why should I or should I not make it a 24v again?
  17. H

    New to the Forum...New M1009...stock...what to mod first.

    So I picked up my first k5 m1009 yesterday, odo says 75k but might have rolled over...anywho after my first drive home in it (80 miles, no problem) I felt like I had lost some of my hearing (6.2L D) lol First things Id like to do along with some other mods you guys recommend... (Only mod is that...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks