- 1,079
- 57
- 48
- Location
- New Palestine Indiana
I am heading down Friday at about noon from just east of Indy.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2013 Haspin fall rally
- Thread starter DJones
- Start date
Durango_USMC
Member
- 663
- 0
- 18
- Location
- Indianapolis, IN
I don't know if I'll be able to keep up with that slick and fancy 5 ton! Great looking truck by the way. if no one is heading down through indy saturday morning I may take you up on that offer sir.
creekrider
Member
- 39
- 0
- 6
- Location
- Warsaw,IN
I am planning on heading down from Warsaw early Saturday morning if that works for anyone. I have not picked a route yet.
- 1,079
- 57
- 48
- Location
- New Palestine Indiana
Just let me know.
rebelcummins
Member
- 152
- 4
- 18
- Location
- west alexandria, Ohio
Sparky, sounds good to me but I won't be able to leave till Friday morning. The new job I picked up I'm working odd hrs, 3pm-5am Monday throu Friday but I only could manage to get Friday off.
Donnerwetter58, I understand where your coming from on oxford is a bit of a distance but, if for any reasone you can't leave till Friday let me know.
Dan, I still think you should meet up with me on Friday morning unless you can leave Thursday then by all means take advantage of the opportunity.
If anyone els is leaving out for haspin on Friday morning and is close to eaton, Ohio let me know, I would really like to team up with 1 or more to the rally. I really don't wante to travel alone just in case. Let me know if anyone wants to join my convoy.... FYI, I have only been there once.... I forget how to get there... Lol..
BSutter
Member
- 181
- 1
- 18
- Location
- Cincinnati, Ohio
I live not far from donnerwetter58 and will be heading out Friday, unless I decide to leave Thursday right after work. The after work thing would put me on the road about 18:00 hrs.
Friday morning has no set time at the moment.
rebelcummins
Member
- 152
- 4
- 18
- Location
- west alexandria, Ohio
ok, I won't be getting off work till 0400 or 0500 Friday morning anyway so if you do want to leave on Thursday that's fine no biggy.
BSutter
Member
- 181
- 1
- 18
- Location
- Cincinnati, Ohio
rebelcummins - sent you a PM
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
Hey rebelcummins... got some bad news for ya. bring your groin sling with you to haspin (PG-13 remember).... your going to need it to load all 28 tires in the back of your truck... were sleeping in the truck again this fall and at least I got our 3 oldest kids helping me load them... if you were coming on Thursday, we can back the truck together and roll them right in....
jdknech
Active member
- 1,095
- 4
- 38
- Location
- Jeffersonville, Indiana
what about using stxsix's crane to lift them in to the truck? just thinking out loud...
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
Sure if Xtsix is up for it but they're not on rims, just tires... the tires are about 30lbs each. Not bad to lift but 28.... he's going to have to take intervals....
augiedoggy
New member
- 503
- 13
- 0
- Location
- Cincinnati Ohio
So I was thinkin', separated dog bones are pretty common, and field repairs needed. We twist and contort
our old trucks over whoopty whoos and stress them to the max.
Thankfully, someone brings a welder and a bar is welded on to retain the bad bushing.
The hardest part seems to be getting the separated bushing back together.
So my thought is a truck ratcheting load binder to press the separated bushing back into place.
Does anybody have one of those they could bring to the rally? Gungearz? Rebelcummins?
Anyone have any other ideas to press them back on?
our old trucks over whoopty whoos and stress them to the max.
Thankfully, someone brings a welder and a bar is welded on to retain the bad bushing.
The hardest part seems to be getting the separated bushing back together.
So my thought is a truck ratcheting load binder to press the separated bushing back into place.
Does anybody have one of those they could bring to the rally? Gungearz? Rebelcummins?
Anyone have any other ideas to press them back on?
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
Hmmmmm.... I might be able to grab one or pick one up at harbor freight.... what size you thinkin'...? I am going to be bringing 6 spare deuce dog bones... you 5 ton guys just need to be alittle careful....
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
I have a high lift Jack. Last time it took a westycucv and my truck to play tug o war on a 5 ton to get it back to together.
augiedoggy
New member
- 503
- 13
- 0
- Location
- Cincinnati Ohio
Yep, I was there. Gimp used a fire hose twisted to draw it into place, right?
not sure how the high lift would have worked in that case.
Will someone have a welder?
Another thought, is it usually a bushing in a certain location that seperates?
I may install retainers as a preemptive strike.
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
augiedoggy;1419805 Will someone have a welder? Another thought said:
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
Stretch I think had come up with some keepers that were 3 inch circles with a half inch hole that you bolted to the bushing after drilling and taping a hole in it.
rebelcummins
Member
- 152
- 4
- 18
- Location
- west alexandria, Ohio
Pm sent back.
rebelcummins
Member
- 152
- 4
- 18
- Location
- west alexandria, Ohio
No biggy for me, I won't be able to show up till Friday morning so if you throw them off ill reload them in my truck when I get there.
rebelcummins
Member
- 152
- 4
- 18
- Location
- west alexandria, Ohio
ill bring some stuff, don't worry I have a 13,200 LB welder too.