• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

6.2 rebuild. what changes can i make for more HP?

mikegoobs

New member
15
0
0
Location
Prunedale, CA
Im rebuilding my 6.2 from my m1009 and i was wondering if there was anything i could do to the motor to get more hp and torque out of it. Injector mods? top end mods? what can i do while i have this thing apart?
 

cucv1833

Member
533
4
18
Location
Lake Charles, LA
Im rebuilding my 6.2 from my m1009 and i was wondering if there was anything i could do to the motor to get more hp and torque out of it. Injector mods? top end mods? what can i do while i have this thing apart?
Did you consider a Turbo theres plenty of threads on that. You can look into marine injectors and turn up the I.P. a little 1/8-1/4 turn. And maybe cold air induction.

If i ever rebuild mine i will put a stud girdle kit in it and another Gm-4 Turbo

Or you can do this-
GM 6.2L Buildup - Diesel Power Magazine

Im no expert someone will chime in with better mods that you are looking for.

Goodluck
 

Loco_Hosa

Member
462
4
18
Location
Ethel, Wa
Did you consider a Turbo theres plenty of threads on that. You can look into marine injectors and turn up the I.P. a little 1/8-1/4 turn. And maybe cold air induction.

If i ever rebuild mine i will put a stud girdle kit in it and another Gm-4 Turbo

Or you can do this-
GM 6.2L Buildup - Diesel Power Magazine

Im no expert someone will chime in with better mods that you are looking for.

Goodluck
All I had ever heard was that the 6.2 was absolute garbage, and that the lower ends would ALWAYS spider-crack. This was an interesting read to be sure!

(Hopefully future CUCV owner)
 

89m1007

Member
79
0
6
Location
great falls montana
Stud Girdle, ARP Head Studs, Fluid Damper 6.5 TD Head gaskets, Ceramic Coated piston tops. Dual Tuna Cans one in each vavle cover. GM-8 Turbo. Marine injection pump with marine injectors.
 

dstang97

Well-known member
1,859
30
48
Location
Clover, SC
Oh, but what about those fuel line magnets? I heard that if you put them around each injector line you will get 80MPG and achieve light speed! :razz:
Where can I find these so called magnets? I already have done all of the other mods except this one.
 

cpf240

Active member
1,479
5
38
Location
Free in Northern Idaho
Where can I find these so called magnets? I already have done all of the other mods except this one.
Well, I've only read about them, but I understand that they are made of unobtainium and that the Wally World down the road from Area 51 has them on special sometimes.

I've never been able to get over there in time though. Wonder if I can put them on layaway?
 

islandguydon

Well-known member
3,724
783
113
Location
Michigan
Im rebuilding my 6.2 from my m1009 and i was wondering if there was anything i could do to the motor to get more hp and torque out of it. Injector mods? top end mods? what can i do while i have this thing apart?
Banks Turbo Cobra, about the best you can do.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks