Where is the governor for the aircompressor for the 923? The safety blows off and the primary and secondary charge to over 150psi. I drained the system to 0 and started truck up but still does it. Could there be a blockage somewhere(rust)? Has ABS but has been disabled (military disabled it) light is on. The secondary system when overcharged doesnt operate at all (wipers, horn, etc) .Whats a good way to fix it and is there schematics on this air system somewhere online? Thanks.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
aircompressor overcharges system to 150+psi
- Thread starter bigwhale
- Start date
- Status
porkysplace
Well-known member
- 9,604
- 1,494
- 113
- Location
- mid- michigan
Have you downloaded the technical manuals ? the link is on the toolbar at the top of every page here.
- 26,246
- 1,187
- 113
- Location
- NY
Here you go, all you need to know to fix it.
http://www.steelsoldiers.com/showth...n-air-lines-valves&highlight=desiccant+filter
http://www.steelsoldiers.com/showth...n-air-lines-valves&highlight=desiccant+filter
Last edited:
DH is probably right. Is the pressure regulator adjusted correctly. Get into the TM's located here on the site and use the search function in the forum. 99% of all questions have probably already been answered. Good luck and enjoy the toy !
If you see this happen pump the brakes to try and keep the pressure in check.
If you see this happen pump the brakes to try and keep the pressure in check.
- Status