Hooty481
Member
- 707
- 5
- 18
- Location
- Russell County Kentucky
Just wondering if anyone is using this combination? Looking at getting a trailer to pull behind my 915 and this maybe easy for me to come up with.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Anybody running a m915 m127 combination?
- Thread starter Hooty481
- Start date
Hooty481
Member
- 707
- 5
- 18
- Location
- Russell County Kentucky
Still looking for a little insight. I can't even find any pictures.
wreckerman893
Possum Connoisseur
- 15,644
- 2,127
- 113
- Location
- Akenback acres near Gadsden, AL
I had one for a while and pulled it with my M915.....no issues what so ever. Those trailers were configured so that a 20 foot shipping container could be locked onto them for transport. They are duel voltage so they can be pulled with a civy tractor too.
Hooty481
Member
- 707
- 5
- 18
- Location
- Russell County Kentucky
I appreciate the picture but I meant a m127 hooked to a m915
- 3,230
- 423
- 83
- Location
- Tonopah, AZ
I pull a M127 with my M931A1.
wreckerman893
Possum Connoisseur
- 15,644
- 2,127
- 113
- Location
- Akenback acres near Gadsden, AL
OK....gotcha.....I have my numbers crossed up. You can pull the older trailers with air over hydraulic brakes with an M915. The only issue may be with king pin placement on the trailer. If your M915 has a sliding 5th wheel you should be OK. I pulled several types of older trailers with my M915. You may have to slide the 5th wheel all the way back and remove the mud flaps.