91W350
Well-known member
- 4,414
- 57
- 48
- Location
- Salina, Kansas
Here's a new guy that figured out the search function. Must have a bucket full of those wrenches to sell.....
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
compressor wrench
- Thread starter nczo6
- Start date
Katahdin
Active member
- 1,303
- 23
- 38
- Location
- Scarborough, ME
My wrench set from Comdriver arrived in time to change the belt this weekend. I found a short 2x4 was great for pushing the front wrench down into the engine compartment. I threaded the two bolts back onto the pulley to hold the front wrench in place and rotated the pulley from the rear.
Here's a pic of the air compressor pulley un-threaded, I dabbed some anti-seize in there for next time. I also changed out the air governor since it was spitting air at peak pressure.
Here's a pic of the air compressor pulley un-threaded, I dabbed some anti-seize in there for next time. I also changed out the air governor since it was spitting air at peak pressure.
