• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

compressor wrench

Katahdin

Active member
1,303
24
38
Location
Scarborough, ME
My wrench set from Comdriver arrived in time to change the belt this weekend. I found a short 2x4 was great for pushing the front wrench down into the engine compartment. I threaded the two bolts back onto the pulley to hold the front wrench in place and rotated the pulley from the rear.

Here's a pic of the air compressor pulley un-threaded, I dabbed some anti-seize in there for next time. I also changed out the air governor since it was spitting air at peak pressure.
 

Attachments

Top