• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

CUCV ground help

NMerenda

Member
86
0
6
Location
Rochester, NY
I was poking through some stuff the other day and noticed that a ground has been disconnected or looks to be ripped off. Any idea where it is supposed to hook up to? It is grounded to the frame on passenger side.2013-08-17 15.55.52.jpg2013-08-17 15.55.30.jpg
 

Attachments

Last edited:

dependable

Well-known member
1,720
187
63
Location
Tisbury, Massachusetts
Originally, the ground wire from right side of negative buss bar was bolted onto motor with the second to rear air intake manifold bolt. Originality aside, there should be ground wires connecting chassis to motor, motor to buss bar and body to frame. Looks like you have at least one other loose wire as well, the red one over heater hose..
 

NMerenda

Member
86
0
6
Location
Rochester, NY
I know about the loose wire. It goes to the alternator. Ordered some boots for it already. Ill check the ground connection. Where could I go about purchasing some more ground wire?
 
Top